China atlas copco compressor component parts Manufacturer, Supplier, Factory

Atlas Copco 3001151070 B kit is a maintenance kit specifically designed for certain types of equipment. The "Ppng6 To Ppng37" screw-type air compressor series has a power range from 6kW to 37kW.

If you need to purchase or confirm the specific compatible model, it is recommended to provide the complete model number of the compressor (such as GA22, GA37, etc.), and refer to the corresponding number in the official Atlas Copco spare parts catalogue to ensure complete compatibility of the kit with the equipment. Regular replacement of the original filter kit is an important maintenance measure for maintaining the performance of the compressor and extending its service life.

During use, it is necessary to follow Atlas Copco's recommendations to regularly inspect and replace the air filter components. Generally, when the operating environment of the equipment is relatively clean, the replacement cycle can be appropriately extended; if the environment is dusty, the replacement cycle should be shortened to ensure the normal operation of the air compressor and the quality of the compressed air. When replacing, it is necessary to select qualified accessories certified by us to ensure the filtering performance and equipment compatibility.

Atlas Copco Gear Trial Run and Inspection Preliminary Inspection Manually rotate the gear shaft to feel if the rotation is smooth, and check for any sticking, abnormal noise or eccentric vibration. Check if the lubrication path in the gearbox is unobstructed, and add gear oil to the standard level as per the regulations. No-load Trial Run Connect the power supply and conduct a short-term (5-10 minutes) no-load operation. Listen for any abnormal noises (such as metal friction sounds, high-frequency squeals) from the gearbox. After stopping the machine, check the temperatures of the bearings and gears (should not exceed the ambient temperature by 40°C), and observe for any oil leakage. Load Test Gradually load to the rated pressure and run for more than 30 minutes. Recheck the noise, temperature and sealing conditions, and confirm there are no abnormalities.

Maintenance and replacement precautions for the sealing components of Atlas Copco oil-injection screw compressors: Replacement cycle: Generally, it is replaced along with the regular maintenance of the compressor (such as after 8,000 to 16,000 hours of operation). If leakage is detected , it should be checked and replaced immediately. Installation requirements: During installation, the sealing surfaces need to be kept clean to avoid scratches on the sealing components; O-rings and other elastic parts should avoid excessive stretching or twisting to ensure uniform force distribution. Prioritize original factory parts: Different brands and models of oil-injection screw compressors (such as Atlas Copco GA series, Sullair LS series, etc.) have differences in the size and material of the sealing components. It is recommended to use original factory parts to ensure precise matching with the sealing grooves, shaft diameters, etc., and to avoid secondary leakage due to fitting issues.

Reference for common related electromagnetic valve models of Atlas Copco: Electromagnetic valves for pressure control or loading/unloading, which may use the number 1089038019 (applicable to medium and high pressure systems);