China Atlas Copco V-Belt Part Manufacturer, Supplier, Factory

Atlas Copco Installation and Maintenance Guidelines During installation, it is necessary to clean the oil stains and impurities from the surface of the distance ring, ensuring a tight fit with the mating parts without any gaps or skew. Avoid striking the edge of the distance ring (especially thin-walled parts), as this may cause deformation and affect the dimensional accuracy. During maintenance and inspection, check if the distance ring is worn, deformed or cracked. If any abnormalities are found, it should be replaced promptly; otherwise, it may lead to a decrease in the assembly quality and operational stability of the air compressor, causing vibration, abnormal noise or leakage, etc. Although the distance ring is a small standard part, its accuracy directly affects the assembly quality and operational stability of the air compressor. When selecting and installing, it is necessary to strictly follow the requirements of the equipment manual.

Working principle： Expansion and contraction driven: The constant temperature valve mainly operates based on the principle of thermal expansion and contraction. Special expansion temperature-sensitive paraffin wax and other components are usually used as the temperature sensing elements. When the oil temperature rises to the melting point of the paraffin wax, the wax expands significantly, generating a large force that pushes the push rod, causing the valve core to move and opening the valve; when the oil temperature drops, the paraffin wax contracts due to the cold, and under the spring rebound effect, the valve core resets, closing or reducing the valve opening. Oil passage control: The expansion and contraction of the valve core is used to adjust the changes in the oil passage between the valve body and the housing, thereby controlling the proportion of lubricating oil entering the oil cooler. When the oil temperature is lower than the set value, the valve closes or the opening degree decreases, and the lubricating oil directly returns from the oil-gas tank to the main unit, achieving rapid heating; when the oil temperature is higher than the set value, the valve opens, allowing the lubricating oil to enter the cooler for cooling, and the cooled lubricating oil returns to the main unit, thereby ensuring that the rotor temperature remains within the set range.

The Atlas Copco 100 HP Oil Injected Air Compressors GA55 of the GA series is one of the ideal choices for producing compressed air and reducing energy consumption. GA55 Atlas Copco Rotary Screw Air Compressors series: follow China Taike Trading online distribution network to check out GA55P, GA55FF, GA55+, GA55+ FF (air cooling & water cooling options are available).

The original Atlas Copco air filter maintenance kit has been rigorously tested in terms of filtration efficiency, dust holding capacity, and structural strength, and is perfectly matched with the equipment design. It can maximize the filtration effect. Non-original filter elements may have issues such as insufficient filtration accuracy, excessive intake resistance, or poor sealing. Long-term use may lead to accelerated wear of the main unit, increased energy consumption, and ultimately increase the maintenance cost of the equipment.

lf you are looking for GENUINE 1625202501 MOTOR GA75VSD 380/50-460/60 ATLAS COPCO MOTOR By China Supplier, you are on the right page. Just feel free to contact usnow. Being one of the genuine spare parts online suppliers of air compressorsbased in China, focusing on serving worldwide international customers.Taike Trading strives to serve you the Parts at a best discount price.

For specific models, installation specifications or replacement information, it is recommended to provide the complete model of the equipment (such as the model of the dryer and air compressor), or refer to the component numbers in the official technical manual of Atlas Copco to ensure a proper selection. Low-temperature environments have a high requirement for the reliability of sensors, so it is advisable to choose original factory parts to ensure system compatibility and service life.