China Atlas Copco 2906025000 Manufacturer, Supplier, Factory

Atlas Copco 2906035200,The intake valve is the "breathing hole" of the air compressor, responsible for controlling the amount of fresh air intake to ensure the normal operation of the compressor and the output of compressed gas meeting the requirements. The intake valve is controlled on and off by the solenoid valve to achieve automatic loading and unloading of the compressor 5. When the pressure does not reach the set value, the intake valve is fully opened for loading; when the pressure is too high, it automatically unloads to protect the equipment and reduce energy consumption. The intake valve regulates the intake volume to control the output pressure and flow of the compressor, meeting the needs of different working conditions. The intake valve is equipped with a check valve to prevent reverse flow of compressed air and avoid damage to the exhaust system. The bypass valve of the intake valve is open during no-load or shutdown to prevent the formation of a vacuum in the separation oil tank and ensure the normal atomization and circulation of lubricating oil.

Atlas Copco Installation and Maintenance Guidelines During installation, it is necessary to clean the oil stains and impurities from the surface of the distance ring, ensuring a tight fit with the mating parts without any gaps or skew. Avoid striking the edge of the distance ring (especially thin-walled parts), as this may cause deformation and affect the dimensional accuracy. During maintenance and inspection, check if the distance ring is worn, deformed or cracked. If any abnormalities are found, it should be replaced promptly; otherwise, it may lead to a decrease in the assembly quality and operational stability of the air compressor, causing vibration, abnormal noise or leakage, etc. Although the distance ring is a small standard part, its accuracy directly affects the assembly quality and operational stability of the air compressor. When selecting and installing, it is necessary to strictly follow the requirements of the equipment manual.

Attention to the Atlas Copco Adsorption Dryer Silencer: During installation, ensure that the sealing gasket is intact to prevent air leakage, which could lead to increased noise and reduced regeneration efficiency; Do not replace it with an incompatible model at will (for example, if the diameter is too small, it will cause excessive exhaust resistance, affecting the regeneration effect of the adsorbent); The original factory silencer is usually designed with acoustic optimization, not only providing better noise reduction effects, but also ensuring the smoothness of the regeneration exhaust and maintaining the normal cycle of the dryer.

If you are searching for 1622507380 AIR FILTER – Atlas Copco China Supplier, You are Come to the right place. we provide you Genuine Original Atlas Copco Air Filter and Other’s Parts. GA30, GA37, GA45+basically use this air filter. The air filter assembly is 1622507380=1622507300, and the internal filter element is 1613740800=1613740700. Check the blow is specific data for you to cross-check.

Maintenance recommendations for the oil filter of Atlas Copco screw air compressors: Replacement cycle: Under normal operating conditions, replace the filter once every 2,000 - 3,000 hours. In harsh environments (such as high dust and high temperature), this period should be shortened to 1,500 hours. Synchronous operation: When replacing the filter element, also simultaneously discharge the settled oil at the bottom of the oil tank (containing a large amount of impurities) and refill the oil to the specified level. Selection requirements: It is necessary to select original factory or certified filter elements that match the compressor model to avoid equipment damage due to size mismatch or insufficient filtration accuracy. Effective maintenance of the oil filter can significantly reduce the wear rate of the screw main unit and is a key aspect of the daily maintenance of the compressor unit with low cost and high efficiency.

The air compressor regular maintenance kit is designed to ensure the normal operation of the air compressor and extend its service life.