China Atlas Copco 2901990098 Manufacturer, Supplier, Factory

The solenoid valve of the air compressor is a key component for controlling the flow direction, on-off and system protection of compressed air. It is mainly divided into two types: loading solenoid valves and venting solenoid valves.

Atlas Copco 2910303200,Controlling intake air flow and ensuring stable supply. The intake valve regulates the amount of air entering the compressor by adjusting the opening degree of the valve plate or the movement of the piston, ensuring a stable supply of gas in the cylinder. When the system pressure reaches the set value, the intake valve closes to reduce the intake volume; conversely, it opens to increase the intake volume, thereby matching the load demand and maintaining operational efficiency. Implementing loading and unloading functions, when the air compressor starts or stops, the intake valve is controlled quickly to open or close through an electromagnetic valve or a cylinder to protect the internal components of the main unit. Capacity adjustment and energy-saving operation. Through the capacity adjustment valve or proportional adjustment mechanism, the intake valve can dynamically adjust the opening degree according to the actual gas usage demand, avoiding excessive compression of air and reducing energy waste.

Atlas Copco 1420050839,The O-ring is a seemingly insignificant yet crucial sealing component. It fills the gaps between components through elastic deformation and is responsible for ensuring the efficient sealing of liquid and gas media by the air compressor. They are suitable for secondary static and dynamic uses. The O-ring can be sealed radially or axially as a whole. The sealing is achieved during assembly through axial or radial movement within the air compressor. Although the O-ring is small, it is the key to ensuring the sealing performance, efficiency, and lifespan of the equipment. Correct selection, proper installation, and meticulous maintenance are crucial.

Atlas Copco Maintenance Tips: Regular Inspection: Remove the cylinder cover and clean the valve surface of oil stains and carbon deposits (especially for piston-type air compressors, as high-temperature lubricating oil can easily cause carbon deposits); Replace Wear Parts: Valve plates, springs, sealing gaskets, etc. are considered wear parts. When wear, deformation or aging is detected, they should be replaced in time; Keep Clean: Avoid introducing impurities during installation. The filter device of the intake system needs regular maintenance to reduce dust entering the cylinder. Although the cylinder cover valve is a small component, it directly affects the compression efficiency and operational stability of the entire machine. During daily maintenance, special attention should be paid to its sealing performance and operational flexibility. If any abnormalities occur, timely repairs should be carried out to extend the service life of the air compressor.

Atlas Copco Installation and Maintenance Guidelines During installation, it is necessary to clean the oil stains and impurities from the surface of the distance ring, ensuring a tight fit with the mating parts without any gaps or skew. Avoid striking the edge of the distance ring (especially thin-walled parts), as this may cause deformation and affect the dimensional accuracy. During maintenance and inspection, check if the distance ring is worn, deformed or cracked. If any abnormalities are found, it should be replaced promptly; otherwise, it may lead to a decrease in the assembly quality and operational stability of the air compressor, causing vibration, abnormal noise or leakage, etc. Although the distance ring is a small standard part, its accuracy directly affects the assembly quality and operational stability of the air compressor. When selecting and installing, it is necessary to strictly follow the requirements of the equipment manual.

Atlas Copco 2901066000，The intake valve of the air compressor is also known as the load reduction valve. When the compressor starts, the load reduction valve is in a closed state, thereby reducing the starting load of the compressor. During normal operation, the opening degree of the intake valve is controlled by using a proportional regulation method based on the changes in the exhaust pressure. The intake valve of the air compressor.