China Atlas Copco 2901100900 Manufacturer, Supplier, Factory

Atlas Copco The air compressor temperature sensor is an important component used for real-time monitoring of the temperatures of key parts of the compressor unit (such as exhaust temperature, oil temperature, and motor temperature, etc.). Its core function is to detect temperature changes and provide data support for the control system, ensuring that the equipment operates within a safe temperature range. At the same time, when abnormal temperatures occur, it triggers protection mechanisms (such as shutdown and alarm) to prevent mechanical failures or safety risks caused by overheating.

The air compressor oil filter is a key component of the lubrication system of an air compressor. It is mainly used to filter impurities, particles and contaminants in the lubricating oil, ensuring that the lubricating oil entering the compressor meets the cleanliness standards, thereby protecting the internal components of the compressor (such as bearings, gears, rotors, etc.) from wear and damage, and extending the service life of the equipment. Core functions Impurity filtration Intercept solid particles such as metal debris, dust, and carbon deposits, preventing them from circulating into the working components of the compressor. System protection Reduce friction and wear, lower the risk of faults caused by contaminants, and improve the reliability of the compressor. Oil life extension Remove oxidation products and moisture, delay the aging and deterioration of the lubricating oil, and reduce the frequency of oil replacement.

1. Daily maintenance and cleaning Daily drainage: The compressor will produce moisture during operation. To avoid pipeline blockage, we recommend draining the moisture once a day to ensure smooth system flow.

How to correctly select the "soft connection kit for flexible joints" of Atlas Copco screw air compressors Determine the position: transmission end (bevel gear) or pipeline end (quick change / flexible hose). Verify the model and serial number: Confirm the part number by referring to the service manual / nameplate, avoid cross-platform misuse. Pay attention to parameters: Transmission end - compensation capacity, torque, material; Pipeline end - diameter, pressure rating, interface standard, length. Prioritize original factory / certified products: Ensure lifespan and reliability.

Regular inspection and maintenance of the ventilation hose for Atlas Copco air compressors: Check if the hose has any cracks, wear, aging or deformation. Inspect the connection points to ensure they are not loose and that the seal is good, with no air leakage. If any damage is found, it must be replaced immediately; otherwise, it will lead to poor heat dissipation, potentially triggering high-temperature alarms, reduced efficiency or even equipment failure. Installation guidelines: When replacing, follow the requirements in the equipment manual. Avoid over-bending or stretching the hose to ensure a smooth ventilation path without any obstructions.

Never forget to order a spare part and avoid unplanned downtime. As your original equipment manufacturer, we know exactly which parts are needed for every service intervention. These are offered as a single maintenance kit with the quality assurance of genuine Atlas Copco parts.