China Atlas Copco 1624896683 Original Manufacturer, Supplier, Factory

Maintenance related: Atlas Copco has the 8000H maintenance kit, such as the air/oil filter kit with part number 2903752600, which is suitable for Atlas Copco air compressors and includes air filters, oil filters, O-rings and other components. There are also 8000H maintenance kits of models like 1625752600 2903752600 etc., used for fixed oil-injection compressors, with a maintenance interval of 8000 hours.

Maintenance tips for Atlas Copco air compressor thermostat kit: Regularly remove the thermostat valve for cleaning, remove foreign substances that may exist in the lubricating oil, and prevent blockage. You can put the valve core in 80℃ water to observe. If the valve core expands fully in this environment and is 10-15mm longer than at normal temperature, then the valve core is normal. If there are aging or other issues, the thermostat valve needs to be replaced.

When choosing Atlas Copco air compressor mufflers, it is necessary to make a comprehensive match based on the signals of the air compressor, power, exhaust pressure, noise frequency characteristics, and the usage environment (such as whether there is oil contamination, high temperature, etc.), in order to achieve the desired noise reduction effect and ensure the normal operation of the compressed air system.

The Atlas Copco DD60 oil coalescing filter is a crucial equipment for upgrading the quality of compressed air, especially indispensable in scenarios with high cleanliness requirements. During daily use, proper maintenance and timely replacement of the filter element are the core to ensuring its long-term efficient operation. It is recommended to strictly follow the maintenance guidelines in the equipment manual.

Atlas Copco Maintenance and Replacement Recommendations Replacement Cycle: it is recommended to replace the filter according to the specified cycle in the unit maintenance manual . If the dust concentration in the usage environment is high, the replacement cycle should be shortened . Condition Judgment: Some models are equipped with an air filter pressure differential indicator. When the indicator value exceeds the set threshold, it indicates that the filter is clogged and needs to be replaced immediately; without an indicator, regularly disassemble and inspect the accumulated dust on the filter material surface. If it is obviously clogged or damaged, replace it immediately. Replacement Precautions: Before replacement, the unit must be shut down and the power disconnected to ensure safety. During installation, clean the impurities around the air inlet to avoid contaminants from falling into the air intake pipe during disassembly and assembly.

"D70" might refer to the diameter specification of the conveying disc (such as 70mm), which is used to accommodate materials of specific sizes (such as small fasteners, accessories, etc.); "10" might be related to the rated conveying capacity, the applicable pressure parameters (such as 10bar), or the installation interface specifications.