China Air Compressor Spare Parts Oil Tube Manufacturer, Supplier, Factory

Key points for maintenance and replacement of Atlas Copco (Atmospheric Copco) solenoid valves: During daily use, it is necessary to pay attention to cleaning to prevent the valve core from getting stuck or the seal from failing due to impurities in the compressed air. If the solenoid valve does not operate, leaks, or control fails, it is necessary to check if the power supply is normal and if the valve core is worn. It is recommended to replace the original factory parts to ensure compatibility and reliability.

Gear transmission of the air compressor body: For Atlas Copco G/GA and other oil-injected screw compressors, "high-performance gear drive" is commonly used. The motor drives the main unit through a gearbox for speed increase, which is a transmission structure rather than a "gear motor".

Maintenance Points Regularly replace the filter element: Based on the usage environment and operating time (generally recommended every 2,000-4,000 hours) , replace the filter element to avoid increased pressure loss and reduced filtering effect due to blockage. Pressure difference monitoring: Some models are equipped with a pressure difference indicator. When the filter element becomes clogged to a certain extent, it will give a prompt, and it is necessary to replace it in time to ensure the normal operation of the system. Sealing check: Regularly check the interface sealing condition of the filtering component to prevent unfiltered compressed air from leaking into the downstream system. If you need to purchase filter elements or want to know about specific compatible models, it is recommended to refer to the PD295 filtering component technical document provided by Atlas Copco officially, or provide the detailed model of the air compressor (such as GA37, GA55)

If the muffler is clogged or damaged, it will cause an increase in intake/exhaust resistance, which may affect the gas production efficiency of the air compressor. Regular inspection and maintenance are necessary. For large air compressor systems, it is recommended to adopt comprehensive noise reduction measures such as soundproof rooms and vibration isolators for better results.Well-known brands (such as Atlas Copco, Ingersoll Rand, etc.) all have corresponding air compressor mufflers. Depending on the specific model, original factory parts or third-party products that meet the specifications can be selected.

The centrifugal cooling fan feature of Atlas Copco air compressor GA55: It adopts a low-speed centrifugal fan design, featuring high cooling air volume and low noise. The fan energy-saving cycle controls the fan's start/stop by monitoring the outlet temperature of the main unit and the ambient temperature. This not only saves energy but also prevents condensation water from forming in the GA VSD compressor when operating at low loads.PRICE INQUIRY

Key points for replacement and installation Shut down the equipment, release pressure and cool down to normal temperature. Close the inlet / return oil valves to prevent hot oil from spilling out. Record the path of the pipeline and the sequence of the joints, and keep the identification of the old parts. Clean the interfaces and installation surfaces. Replace the O-ring / sealing parts if necessary. Tighten the joints according to the specified torque; avoid excessive bending and stretching of the rubber hose; firmly fix the rigid pipe to prevent vibration wear. Before starting the equipment, check the oil level and sealing performance. After operation, recheck the pressure drop and leakage.