China Air Compressor HP ELEMENT EXCHANGE KIT Manufacturer, Supplier, Factory

Maintenance points for the solenoid valves of Atlas Copco industrial compressors: Solenoid valves are prone to getting stuck or leaking due to impurities and oil contamination in the compressed air or aging of the seals. Regular inspections and cleanings are necessary. If the valve fails to operate properly, it is necessary to check if the power supply is normal and if the valve core is worn. In case of necessity, the original factory solenoid valves should be replaced to avoid control system failures.

The working principle of oil injected air compressor is mainly based on the principle of volumetric compression, and multiple functions such as cooling, sealing and lubrication are achieved by injecting lubricating oil.

If you need to purchase or confirm the specific compatible model, it is recommended to provide the complete model number of the compressor (such as GA22, GA37, etc.), and refer to the corresponding number in the official Atlas Copco spare parts catalogue to ensure complete compatibility of the kit with the equipment. Regular replacement of the original filter kit is an important maintenance measure for maintaining the performance of the compressor and extending its service life.

Gear transmission of the air compressor body: For Atlas Copco G/GA and other oil-injected screw compressors, "high-performance gear drive" is commonly used. The motor drives the main unit through a gearbox for speed increase, which is a transmission structure rather than a "gear motor".

Common Problems and Maintenance of Atlas Copco Oil Separator Reduced separation effect Reason: Filter blockage, damage, poor return oil pipeline, or excessively high temperature of the oil-gas mixture . Solution: Replace the filter, clean the return oil pipe, and check the cooling system to ensure the exhaust temperature is normal . Excessive pressure difference Sign: The pressure difference between the separator inlet and outlet exceeds 0.15MPa, resulting in reduced exhaust volume and increased energy consumption. Solution: Replace the filter in time to avoid filter damage or overload of the housing due to excessive pressure difference. Return oil failure Reason: Return oil valve blockage, throttling hole blockage, or leakage of the return oil pipe. Harm: The compressor operates without oil, causing wear of the main unit and sudden temperature rise. Solution: Disassemble and clean the return oil components to ensure smooth return oil.

Correlation check: Verify that the cooler and the lubrication system are unobstructed to prevent premature damage to the temperature control kit due to blockage by other components. After replacement, it is recommended to shorten the initial oil change interval to ensure system cleanliness. The normal operation of the constant temperature kit directly affects the lubrication effect and lifespan of the air compressor. When replacing it, strictly follow the technical manual of the corresponding model.