China 2908850000 Manufacturer, Supplier, Factory

1900520440 Maintenance and Fault Handling of the Oil Temperature Electronic Elektronikon Control Module of Atlas Copco Air Compressors If there are abnormal oil temperature readings, the heating/cooling system does not respond, or the oil temperature protection is triggered frequently, it may be related to this control module. Maintenance suggestions: First, check whether the oil temperature sensor and connection lines are normal. Eliminate front-end signal faults; If the module itself is faulty, it is recommended to replace the original factory parts to ensure control performance. After replacement, calibration of parameters through special tools is required to make it match the model; Regularly check the module status through the self-check function of the Elektronikon system to promptly detect potential problems.

Atlas Copco Fan Motor The fan motor of the air compressor is a key component in the cooling system of the air compressor. Its main function is to drive the fan to rotate, and it cools the compressed air, lubricating oil or the body of the air compressor through forced air cooling, ensuring that the equipment operates stably within an appropriate temperature range.

Maintenance and Replacement Suggestions for Air Filters of Atlas Copco Screw Air Compressors Replacement Cycle: Generally, it is recommended to replace the air filter according to the specified cycle in the equipment maintenance manual (such as after 2000-4000 hours of operation, which may vary depending on the model and usage environment). If the dust concentration in the usage environment is high (such as in mines or cement plants), the replacement cycle should be shortened. Inspection Method: Regularly (e.g., weekly) check the cleanliness of the air filter. You can determine if it is clogged by using a pressure differential indicator (available on some models) — when the indicator value exceeds the set threshold, it is necessary to replace it promptly. Replacement Precautions: During replacement, ensure proper installation and good sealing; avoid allowing impurities to fall into the intake pipe during disassembly and assembly. After replacement, check for any leakage.

Atlas Copco CD5-22 Control Valve Maintenance and Precautions Regular Inspection: Regularly check if the valve has any air leakage, jamming or pressure adjustment failure. If abnormal pressure fluctuations or slow response are detected, it may be due to aging internal seals or blockage by impurities. Cleaning and Replacement: During maintenance, the valve body can be disassembled (requiring professional operation). Clean the internal valve core and valve seat, replace the aged seals; if the valve core is severely worn, it is recommended to replace the control valve as a whole to ensure performance. Parameter Matching: When replacing, confirm that the pressure adjustment range, interface size of the new valve match the original system, to avoid control failure due to incompatible specifications.

Atlas Copco confirms the type of lubricating grease Based on the type of air compressor components and operating conditions , select the matching special lubricating grease . It is strictly prohibited to mix different types or grades of lubricating grease . Check the parameters of the lubricating grease: such as applicable temperature range, pour point , and penetration . Atlas Copco cleans the components to be lubricated Stop the machine and ensure the components are completely cooled. Use oil-free cotton cloth or dedicated cleaning agents to wipe the old lubricating grease, oil stains, dust, and metal debris on the surface of the components, especially the key areas such as the bearing seat and the meshing surface of the gears, which need thorough cleaning .

Atlas Copco 2906044100,The Atlas Copco air compressor oil pump is the core component of the lubrication system for air compressors. It ensures the normal operation and long lifespan of the air compressor by providing stable, clean and pressure-appropriate lubricating oil. Its main function is to supply lubricating oil to various bearings and moving parts of the air compressor, playing roles such as lubrication and friction reduction, cooling and temperature reduction, sealing and leak prevention, cleaning and flushing, and vibration reduction and buffering.