China 2906073700 Manufacturer, Supplier, Factory

1089962513 Purchase suggestion for Atlas Copco compressor pressure sensor: 1089962513 Atlas Copco pressure sensor has very high requirements for measurement accuracy and stability. By purchasing the original factory part 1089962513 Atlas Copco, inferior sensors, due to insufficient accuracy or poor reliability, may cause unstable equipment operation and even pose safety hazards. 1089962513 Atlas Copco pressure sensor is the "nerve ending" of the air compressor's automation control. Its performance directly affects the operation efficiency and safety of the equipment. 1089962513 Atlas Copco should pay special attention during daily maintenance.

Atlas Copco 2901205100,Air filter materials and classification: The materials for coarse filters include stainless steel wire mesh and synthetic fibers. Their application scope is generally in industrial environments, such as in mechanical manufacturing, textile printing and dyeing, for removing large particles of impurities. The materials for medium-efficiency filters include synthetic fibers and glass fibers. Their application scope is for areas with high requirements for air quality, such as some food processing, pharmaceuticals, and clean workshops. The materials for high-efficiency filters include ultra-fine glass fibers and stainless steel wire mesh. Their application scope is for precise environments, such as electronics, bioengineering, and clean operating rooms, to ensure air cleanliness. Oil filter materials and classification: Paper-based oil filters are used in conventional industrial environments to filter large particles of impurities in lubricating oil. Synthetic fiber oil filters are used in metallurgy, textiles, and electronics, suitable for medium-sized particle filtration requirements. Glass fiber oil filters are used for high-precision filtration requirements, such as in the lubrication systems of thermal power and nuclear power equipment. They are mainly used in mechanical manufacturing to ensure the normal operation of pneumatic tools and equipment.

Atlas Copco 2906030100 ,The principle of the air compressor maintenance kit: Replace worn parts, perform maintenance and troubleshooting, ensure safety,Air filter element Remove garbage from the bottom. The filter with grease needs to be soaked in foam-free detergent. Damaged filters need to be replaced. Oil separator To ensure high efficiency of oil-gas separation, it is necessary to pass the compressed gas from the collision and gravity separation compressor through the oil separation process. Safety valve It is necessary to ensure the quality and safety of pressure vessels. Professional adjustments are required. Lubrication system Test the oil quality with screw oil and maintain the lubrication of bearings and the lifespan of the compressor Maintenance process standardization 1. Shut down and power off: Turn off the power and hang warning signs 2. System depressurization: Close the water supply and gas supply valves 3. Disassembly and inspection: Use tools to disassemble the components. It is necessary to check the rotor alignment status and bearing damage 4. Component maintenance: Replace the filter and lubricate, etc

Atlas Copco 1088000053，The contactor is one of the core components of the electrical control system of an air compressor. Essentially, it is an electromagnetic switch that controls a larger current using a smaller current. It is specifically used to control the start, operation, and stop of the main motor of the air compressor. The contactor not only can connect and disconnect circuits, but also has low-voltage release protection function. In electrical engineering, because it can quickly cut off the main circuits of AC and DC and can frequently connect and control circuits with large currents (up to 800A), it is often used as a control object for electric motors, and can also be used as a control device for factory equipment, electric heaters, work machines, and various power units and other power loads. The contactor has a large control capacity and is suitable for frequent operations and remote control. It is one of the important components in the automatic control system.

Failure causes and maintenance suggestions for Atlas Copco Air compressor O-ring Common failure causes: Long-term high-temperature aging leads to reduced elasticity, wear or scratches (such as impurities entering the sealing surface), improper installation (such as twisting, being too tight), incorrect selection (material not suitable for the medium or temperature). Maintenance precautions: Regularly inspect the condition of the O-ring. Replace it promptly if it shows signs of hardening, cracking, deformation or leakage. When replacing, clean the sealing groove and mating surface, remove oil stains, burrs and impurities. Avoid using sharp tools to scratch the O-ring during installation. If necessary, apply special lubricating grease (compatible with the medium) to assist in installation. Select matching specifications and materials for the O-ring based on the air compressor model and location.It is recommended to use original factory parts to ensure the sealing effect.

Atlas Copco 1627456071,The lubricating oil for air compressors is the core medium that ensures the efficient and stable operation of the equipment. Its multi-functional nature requires the lubricating oil to possess appropriate viscosity, high flash point, good oxidation resistance and anti-emulsification properties, among other performance indicators 68. Different compressor types (such as screw type and piston type) and operating conditions (temperature, load) require the selection of specific types of lubricating oil (mineral oil, semi-synthetic or fully synthetic oil), and regular replacement is necessary to prevent performance degradation and resulting equipment failures.