China 2906059100 Atlas Copco Manufacturer, Supplier, Factory

Atlas Copco 2906024100,When the high-pressure air compressor is running, the lubricating oil absorbs a large amount of heat generated during the compression process, causing the oil temperature to rise sharply. The ZT3 high-pressure oil cooler adopts a forced circulation cooling system, keeping the oil temperature within the range required by the equipment. This process effectively avoids problems such as reduced viscosity and weakened lubrication performance due to excessively high oil temperature. The ZT3 high-pressure oil cooler is specifically designed for high-pressure air compressors, and its cooling system can meet the circulation requirements of lubricating oil in high-pressure environments. At the same time, for the extreme working conditions that high-pressure air compressors may encounter, the ZT3 oil cooler is equipped with a complete electrical protection system to ensure the stability of the cooling process and prevent safety accidents caused by cooling system failures.

Atlas Copco CD5-22 Control Valve Maintenance and Precautions Regular Inspection: Regularly check if the valve has any air leakage, jamming or pressure adjustment failure. If abnormal pressure fluctuations or slow response are detected, it may be due to aging internal seals or blockage by impurities. Cleaning and Replacement: During maintenance, the valve body can be disassembled (requiring professional operation). Clean the internal valve core and valve seat, replace the aged seals; if the valve core is severely worn, it is recommended to replace the control valve as a whole to ensure performance. Parameter Matching: When replacing, confirm that the pressure adjustment range, interface size of the new valve match the original system, to avoid control failure due to incompatible specifications.

Atlas Copco 2906073800,The function of the Atlas KPC air compressor gearbox is to achieve power transmission and speed regulation through gear meshing. It converts the rotational speed and torque of the input shaft and the output shaft, meeting the requirements of different working conditions. Changing the transmission direction utilizes structures such as sector gears to achieve vertical or inclined power transmission, which is commonly seen in equipment like car differentials. The clutch function realizes power interruption through the separation of gears to ensure the safe operation of the equipment.

Atlas Copco WUX Regulator Valve Maintenance and Precautions Regular Inspection: Observe whether the valve operates smoothly and check for any sticking (possibly caused by oil contamination or impurities); Check the sealing performance. If there is air leakage (such as air flowing through when the valve is closed), replace the sealing element. Cleaning and Calibration: Regularly disassemble and clean the valve core, valve seat, and diaphragm, removing oil stains and carbon deposits; Calibrate the pressure setting value according to the equipment manual to ensure adjustment accuracy (avoid excessive pressure fluctuations). Replacement Suggestions: If the valve cannot be adjusted, has severe air leakage, or suffers mechanical damage, it should be replaced promptly (it is recommended to use original factory parts to ensure compatibility with the compressor control system).

Attention for the oil separation filter of Atlas Copco screw air compressor Part compatibility: The original Atlas Copco oil separation core must be used. It features efficient fiberglass or multi-layer filter materials, offering higher separation efficiency and matching the oil and gas tank in size, thus avoiding poor separation effect, excessive pressure difference or equipment damage caused by non-original products. Avoid contamination: During installation, do not touch the internal filter material of the oil separation core to prevent impurities from entering and affecting the filtering effect. Related maintenance: When replacing the oil separation core, it is recommended to also replace the lubricating oil and oil filter to ensure the overall cleanliness of the lubrication system.

Atlas Copco 0663716702,The sealing function is bidirectional. As a bidirectional sealing element, the initial compression amount during installation in the radial or axial direction determines the initial sealing capacity. The force generated by the system pressure acting on the O-ring is the total sealing force, and this sealing force increases as the system pressure rises. The leak-free sealing can achieve absolute leak-free sealing as long as the O-ring has an initial pressure. Buffering and shock absorption. By utilizing the elasticity of rubber to absorb mechanical vibrations or impacts, the rigidity collision between components is reduced. It buffers the vibration during engine operation and avoids interface loosening. System protection prevents dust, particles, water or corrosive substances from entering the equipment interior, protecting precision components. It plays a waterproof sealing role in electronic equipment and prevents rainwater or moisture from invading the circuit board.