China 2906037800 Atlas Copco Manufacturer, Supplier, Factory

Failure causes and maintenance suggestions for Atlas Copco Air compressor O-ring Common failure causes: Long-term high-temperature aging leads to reduced elasticity, wear or scratches (such as impurities entering the sealing surface), improper installation (such as twisting, being too tight), incorrect selection (material not suitable for the medium or temperature). Maintenance precautions: Regularly inspect the condition of the O-ring. Replace it promptly if it shows signs of hardening, cracking, deformation or leakage. When replacing, clean the sealing groove and mating surface, remove oil stains, burrs and impurities. Avoid using sharp tools to scratch the O-ring during installation. If necessary, apply special lubricating grease (compatible with the medium) to assist in installation. Select matching specifications and materials for the O-ring based on the air compressor model and location.It is recommended to use original factory parts to ensure the sealing effect.

Atlas Copco Air Filter Maintenance and Replacement: It is necessary to conduct regular inspections and replacements based on factors such as the operating time of the compressor and the dust concentration in the working environment to ensure the filtering performance. If the filter becomes clogged or aged, it may cause insufficient air intake, affecting the output efficiency of the compressor and even triggering equipment failures. It is recommended to use original Atlas Copco parts to ensure compatibility with the equipment and filtering effectiveness, and to guarantee the stable operation of the compressor.

The significance of maintaining the oil filter of Atlas Copco air compressors By strictly following the 2000-hour replacement cycle (or adjusting according to actual working conditions), it is possible to ensure that the oil filter always remains in an efficient filtering state, preventing impurities from entering the main unit and causing wear on the screws and bearings. At the same time, it can reduce the rate of lubricating oil deterioration and extend the service life of the unit. The structural design of the original factory oil filter (such as check valves and bypass valves) can also provide reliable protection during the replacement cycle, and is a fundamental maintenance step for ensuring the long-term stable operation of the air compressor.

2901156000 The original Atlas Copco assembly includes components such as oil filters, air filters, oil-gas separation filters, gaskets, and sealing rings.

During use, it is necessary to follow Atlas Copco's recommendations to regularly inspect and replace the air filter components. Generally, when the operating environment of the equipment is relatively clean, the replacement cycle can be appropriately extended; if the environment is dusty, the replacement cycle should be shortened to ensure the normal operation of the air compressor and the quality of the compressed air. When replacing, it is necessary to select qualified accessories certified by us to ensure the filtering performance and equipment compatibility.

How to choose (quickly) Specify the model: Fixed oil injection screw (GA/GX etc.) or mobile air compressor. Key points of working conditions: Ambient temperature, pressure level, whether it is hot / humid / dusty, whether it is in contact with food. Prioritize original factory oil: Highly compatible with seals, oil separation, oil filters and temperature control valves to reduce the risks of oil bubbles, carbon deposits and abnormal fuel consumption.