China 2906007000 Atlas Copco Manufacturer, Supplier, Factory

A high powered modified engine tends to generate excessive blow-by oil and gasses. In these cases, an ordinary small catch can may quickly fill with oil and not be adequate. Like the Radium Engineering Catch Cans, the AOS-R (Air Oil Separator, Return) is responsible for keeping blow-by oil and other pollutants out of the air intake, intercooler, manifold, etc. The main difference is that an AOS-R system returns oil back into the pan above the oil level. This permits a service-free system.

Characteristics and Requirements of Air Compressor Hose Pressure Resistance: It must be able to withstand the rated pressure output by the air compressor (usually ranging from 0.7 to 1.6 MPa, and may be higher in special scenarios), with a certain safety margin to prevent burst due to excessive pressure. Aging and Weather Resistance: It needs to resist the effects of air, humidity, temperature changes, and ultraviolet rays, avoiding cracking, hardening or softening, and extending service life. Flexibility: It should have good bending performance, facilitating flexible arrangement in the working environment and reducing operational restrictions. Anti-wear and Anti-shock: In industrial environments, it may come into contact with the ground, equipment, etc., and needs to have certain wear resistance and anti-shock capabilities to prevent accidental damage. Smoothness of Inner Wall: The smooth inner wall can reduce the resistance of compressed air flow, lower pressure loss, and ensure supply efficiency.

The air compressor temperature sensor is an important component used for real-time monitoring of the temperatures of key parts of the compressor unit (such as exhaust temperature, oil temperature, and motor temperature, etc.). Its core function is to detect temperature changes and provide data support for the control system, ensuring that the equipment operates within a safe temperature range. At the same time, when abnormal temperatures occur, it triggers protection mechanisms (such as shutdown and alarm) to prevent mechanical failures or safety risks caused by overheating.

1900520440 Maintenance and Fault Handling of the Oil Temperature Electronic Elektronikon Control Module of Atlas Copco Air Compressors If there are abnormal oil temperature readings, the heating/cooling system does not respond, or the oil temperature protection is triggered frequently, it may be related to this control module. Maintenance suggestions: First, check whether the oil temperature sensor and connection lines are normal. Eliminate front-end signal faults; If the module itself is faulty, it is recommended to replace the original factory parts to ensure control performance. After replacement, calibration of parameters through special tools is required to make it match the model; Regularly check the module status through the self-check function of the Elektronikon system to promptly detect potential problems.

Atlas Copco 2901063400,By relying on the gravitational force of the condensate water, when the condensate water accumulates to a certain height, the float or the weight is driven by gravity, pushing the valve to fully open and drain the condensate water, while preventing steam leakage. It is composed of components such as the valve body, valve core, and spring. The valve body has channels and sealing surfaces inside, and the valve core controls the gas flow. When the compressor is running, the gas flow is regulated by the shuttle valve to keep the channel open; 5 When the machine stops or the pressure reaches the set value, the shuttle valve closes rapidly to prevent gas backflow. The air compressor valves achieve gas control, oil circuit management and temperature protection through different physical principles, ensuring the efficient and safe operation of the equipment.

Atlas Copco 0663210793，The O-ring is a seemingly insignificant yet crucial sealing component. It fills the gaps between components through elastic deformation and is responsible for ensuring the efficient sealing of liquid and gas media by the air compressor. They are suitable for secondary static and dynamic uses. The O-ring can be sealed radially or axially as a whole. The sealing is achieved during assembly through axial or radial movement within the air compressor. Although the O-ring is small, it is the key to ensuring the sealing performance, efficiency, and lifespan of the equipment. Correct selection, proper installation, and meticulous maintenance are crucial.