China 2903775400 Manufacturer, Supplier, Factory

Attention to the Atlas Copco Adsorption Dryer Silencer: During installation, ensure that the sealing gasket is intact to prevent air leakage, which could lead to increased noise and reduced regeneration efficiency; Do not replace it with an incompatible model at will (for example, if the diameter is too small, it will cause excessive exhaust resistance, affecting the regeneration effect of the adsorbent); The original factory silencer is usually designed with acoustic optimization, not only providing better noise reduction effects, but also ensuring the smoothness of the regeneration exhaust and maintaining the normal cycle of the dryer.

Correlation check: Verify that the cooler and the lubrication system are unobstructed to prevent premature damage to the temperature control kit due to blockage by other components. After replacement, it is recommended to shorten the initial oil change interval to ensure system cleanliness. The normal operation of the constant temperature kit directly affects the lubrication effect and lifespan of the air compressor. When replacing it, strictly follow the technical manual of the corresponding model.

Replacement and Maintenance Precautions If you find that the return oil pipe has corrosion perforations, damaged interface threads, deformed pipes, or leaks, it must be replaced immediately; otherwise, it will cause oil loss, insufficient lubrication, and lead to wear of the main engine. When replacing, it is necessary to use the original factory metal return oil pipe to ensure that the size, interface are consistent with the original components, and avoid installation difficulties or leakage due to mismatch issues. During installation, check whether the sealing parts (gaskets, O-rings) are in good condition. If necessary, replace them simultaneously; when tightening the interface, operate according to the specified torque to prevent excessive tightness from causing thread damage or insufficient tightness that leads to leakage.

The bearing sleeve of Atlas Copco 1613519400 is made of babbitt alloy and copper alloy, which can withstand the high temperature and high pressure of the air compressor. It is precisely manufactured according to the structure of different models to effectively prevent oil leakage, ensure the accuracy of the rotor, and prevent the consumption caused by friction.

The oil cooler of Atlas Copco air compressor GA132 functions as follows: The oil cooler is used to cool the lubricating oil during the operation of the air compressor, absorbing the heat from the compressed air that the lubricating oil has absorbed, and ensuring that the temperature of the lubricating oil remains within an appropriate range, thereby guaranteeing the normal operation and lubrication effect of the air compressor.

Advantages of Atlas Copco Original Parts The Atlas Copco original C142 air filter assembly has undergone model compatibility testing and can ensure the following: It is fully compatible with the intake system of GA90/GA110VSD, avoiding air leakage issues caused by size errors; The filter material has temperature and humidity resistance that is suitable for the working environment of the air compressor (the intake temperature may reach 40-60℃); It cooperates with the main control system to achieve precise blockage alarms, avoiding excessive replacements or delays in maintenance.