China 2901066000 Manufacturer, Supplier, Factory

Working Principle Torque Transmission: The torque output by the motor is transmitted through the outer teeth of the coupling, and then via the inner teeth of the intermediate sleeve to the compressor shaft, achieving power transmission. Flexible Compensation: Axial Offset: The axial clearance between the inner and outer teeth allows for a small amount of axial displacement of the two shafts (typically ±0.5 to ±3mm). Radial Offset: The top of the outer teeth is made into a spherical shape (with the center of the sphere on the axis), allowing for a certain angular deviation between the two shafts (typically ≤1°). Angular Offset: Through the sliding and rolling of the tooth surfaces, the angular errors between the two shafts are compensated. Buffering and Vibration Reduction: The lubricating oil fills between the teeth and can absorb some vibration and impact loads, reducing equipment noise.

Atlas Copco WUX Regulator Valve Maintenance and Precautions Regular Inspection: Observe whether the valve operates smoothly and check for any sticking (possibly caused by oil contamination or impurities); Check the sealing performance. If there is air leakage (such as air flowing through when the valve is closed), replace the sealing element. Cleaning and Calibration: Regularly disassemble and clean the valve core, valve seat, and diaphragm, removing oil stains and carbon deposits; Calibrate the pressure setting value according to the equipment manual to ensure adjustment accuracy (avoid excessive pressure fluctuations). Replacement Suggestions: If the valve cannot be adjusted, has severe air leakage, or suffers mechanical damage, it should be replaced promptly (it is recommended to use original factory parts to ensure compatibility with the compressor control system).

Order will be placed on standard delivery conditions. After the order is placed, an order acknowledgement and tracking information will be provided to you by email.

You are welcomed to come to our factory to buy the latest selling, low price, and high-quality Atlas Copco GA7-75 VSD iPM Air Compressors. We Taike look forward to cooperating with you.

Where can I get the genuine original Part ATLAS COPCO 2906064400 ZR500 VSD 8000H MAINTENANCE KIT? Here you are lucky to find a reliable China supplier. Contact China taike for the latest price and availability as well as delivery time for any “real Genuine original Epiroc Parts” Now.

Atlas Copco 1621490618,During operation, the air compressor generates a large amount of heat. The coolant circulates to remove the heat and prevent the equipment from being damaged due to excessive temperature. High temperatures can reduce the efficiency of the air compressor and even cause component failures. The high boiling point characteristic of the coolant (usually above 104°C) effectively prevents boiling and ensures that the equipment operates at an appropriate temperature. During the compression process, the coolant can fill the tiny gaps between the rotor and the casing to prevent the leakage of compressed gas and improve the compression efficiency. This characteristic is particularly crucial in screw-type air compressors. The coolant can wash away carbon deposits and impurities produced on the friction surfaces, preventing the oil passage from being blocked. Some coolant uses deionized water or synthetic base oil, which can avoid the formation of scale and sediment and maintain the system clean.