China 2230014202 Manufacturer, Supplier, Factory

Attention for the oil separation filter of Atlas Copco screw air compressor Part compatibility: The original Atlas Copco oil separation core must be used. It features efficient fiberglass or multi-layer filter materials, offering higher separation efficiency and matching the oil and gas tank in size, thus avoiding poor separation effect, excessive pressure difference or equipment damage caused by non-original products. Avoid contamination: During installation, do not touch the internal filter material of the oil separation core to prevent impurities from entering and affecting the filtering effect. Related maintenance: When replacing the oil separation core, it is recommended to also replace the lubricating oil and oil filter to ensure the overall cleanliness of the lubrication system.

Replacement and Maintenance Suggestions If you find that the hose has bulges, cracks, aging and hardening, joint leakage or exposed reinforcement layer, it must be replaced immediately to avoid explosion under high pressure and potential safety accidents; When replacing, use the original AC hose to ensure that the pressure resistance level, joint sealing performance and system match. Non-original hoses may have insufficient pressure resistance or poor interface sealing due to poor material quality; During installation, avoid excessive bending or twisting of the hose (the bending radius should be greater than 5 times the diameter of the hose), keep away from high-temperature components (such as exhaust pipes) and sharp objects, and use special pipe clamps for fixation to prevent vibration wear.

Installation and Maintenance: Select the corresponding specification of shock absorbers based on the model and weight of the equipment to ensure uniform force application during installation. After long-term use, check if the rubber has aged, cracked or deformed. If the performance deteriorates, replace the original factory parts in time to maintain the shock absorption effect.

Atlas Copco 1625752501 Notes for Attention Original Equipment Advantage: The original equipment corresponding to this part number is fully compatible with the equipment in terms of size accuracy and filtration efficiency, ensuring the best filtration effect and reducing the risk of equipment damage caused by compatibility issues. Confirm Compatibility: Since the same part number may correspond to a specific model, before replacement, it is necessary to check the model and serial number of the air compressor, or consult an authorized Atlas Copco dealer to ensure the compatibility of the parts.

Installation Specifications: When replacing the cooler kit, strictly follow the steps in the equipment manual to ensure that the sealing components are installed properly, and avoid leakage or insufficient heat dissipation due to improper assembly. Cleaning Preparations: Before installing the new cooler, it is recommended to clean the pipes and interfaces of the cooling system to remove internal residues such as impurities, scale, or oil sludge. Performance Testing: After replacement, start the compressor and monitor parameters such as operating temperature and pressure to confirm that the cooling system is working properly . Source of Spare Parts: It is recommended to purchase this service kit from Atlas Copco's official after-sales service or authorized dealers to ensure the original factory quality and compatibility of the spare parts. Non-original factory spare parts may have size deviations or material non-compliance issues, affecting cooling efficiency and equipment lifespan.

Atlas Copco Air Compressors Oil Injected Screw Compressor Ball Valve 1/4 Selection Recommendation Applicable Models: The interface standards and working parameters need to be confirmed based on the specific model of the oil-injected screw compressor (such as Atlas Copco GA series small machines, Ingersoll Rand SSR series, etc.). Certification Requirements: Prioritize products that comply with industrial standards (such as ISO, DIN) to ensure compatibility with the system. Maintainability: Choose a disassemblable and repairable structure to facilitate the replacement of seals and extend the service life. If used to replace original factory parts, it is recommended to provide the compressor model and the original valve part number to ensure complete matching of size and pressure rating, avoiding any impact on system operation due to compatibility issues.