China 2230000700 Atlas Copco Manufacturer, Supplier, Factory

Key Points for Bolt Installation and Maintenance of Atlas Copco Pre-tightening Torque: Appropriate torque should be applied according to the bolt's strength grade and connection requirements . Excessive torque can cause the bolt to break, while insufficient torque may result in poor sealing or loosening. Surface Treatment: The bolt surface is usually galvanized, phosphated , or oxidized . Before installation, check the surface for rust or damage. Cooperation Precision: The cooperation between the bolt and the nut or the bolt hole must comply with standards . Avoid overly loose or overly tight threads. Regular Inspection: After the air compressor has been running for a period of time, check if the bolts are loose. If rust, deformation, or fracture is found, replace the bolts of the same specification and strength in a timely manner.

Atlas Copco 1604530702,The main functions of lubricating oil are lubrication and reduction of friction. It forms a protective film between moving parts, reduces the friction coefficient, minimizes wear, and extends the lifespan of equipment. It also cools and dissipates heat, absorbs and removes the heat generated by friction, prevents the equipment from overheating, and ensures stable operation. It seals and prevents leakage, fills the gaps between components to prevent gas leakage and impurities from entering, and improves the sealing performance. It prevents rust and corrosion, forms a protective film on the metal surface to resist oxidation and water erosion, and avoids rusting. It cleans and buffers, removes impurities and deposits them at the bottom of the oil tank, and absorbs impact loads to reduce vibration.

Atlas Copco 1616580381，The Atlas Copco air compressor head is the "heart" of the air compressor, responsible for compressing ambient air into high-pressure gas to provide power for various pneumatic equipment. The core function of the air compressor head is to efficiently compress air. It rotates at high speed within the casing with a pair of intermeshing rotors, continuously drawing in air and achieving air compression through the continuously decreasing volume between the rotor teeth. Eventually, it outputs gas that meets the pressure requirements. Compressing air is the most fundamental function of the head, providing a high-pressure gas source for subsequent use. Lubrication and sealing occur in the oil-injected screw compressor head. The lubricating oil is sprayed into the compression chamber, serving to lubricate the rotors, cool the compressed gas, and seal the tiny gaps between the rotors. Reducing noise and vibration The precise rotor design and balancing technology make the head run smoothly, with relatively low noise and vibration.

Maintenance recommendations for the oil filter of Atlas Copco screw air compressors: Replacement cycle: Under normal operating conditions, replace the filter once every 2,000 - 3,000 hours. In harsh environments (such as high dust and high temperature), this period should be shortened to 1,500 hours. Synchronous operation: When replacing the filter element, also simultaneously discharge the settled oil at the bottom of the oil tank (containing a large amount of impurities) and refill the oil to the specified level. Selection requirements: It is necessary to select original factory or certified filter elements that match the compressor model to avoid equipment damage due to size mismatch or insufficient filtration accuracy. Effective maintenance of the oil filter can significantly reduce the wear rate of the screw main unit and is a key aspect of the daily maintenance of the compressor unit with low cost and high efficiency.

Atlas Copco XC2002 Operating Instructions Before operation, it is necessary to familiarize yourself with the equipment manual to avoid parameter errors that may cause protection functions to fail. Regularly check the connection lines of the controller and sensors to ensure stable signal transmission. When a fault alarm occurs, you need to identify the cause based on the code (such as sensor failure, exceeding actual parameters, etc.), solve the problem before restarting the equipment.

Atlas Copco The oil filter and oil separator service kit for the air compressor is a comprehensive accessory set used for the maintenance and servicing of the compressor's oil and gas system. It is mainly used to replace the key filter elements regularly to ensure the cleanliness of the compressor's oil circuit and thorough oil-gas separation, thereby guaranteeing the efficient operation of the equipment and extending its service life.