China 2205678265 ATLAS COPCO Manufacturer, Supplier, Factory

Atlas Copco 2901021800 Original: The core control components use original parts to ensure compatibility and reliability with the system. Non-original parts may pose a risk of parameter deviation.

Maintenance and servicing tips for the tubular coolers of Atlas Copco compressors: Regular cleaning: Depending on the operating environment, clean the inside and outside of the cooling tubes of the tubes and the sealing surfaces of the caps (using chemical cleaning or mechanical flushing) to prevent a decline in heat exchange efficiency. Leak detection: Check for any leaks at the pipe connections and sealing surfaces of the caps. Replace the seals or repair damaged pipes in a timely manner. Flow monitoring: Ensure that the flow and pressure of the cooling medium (water or air) are within the specified range. If insufficient, investigate pipe blockages or pump/fan failures. Anti-freezing protection： In low-temperature environments， after shutdown， drain the accumulated water in the cooling water pipes to prevent cracking due to freezing.

Maintenance suggestions for the regulating valves of Atlas Copco air compressors: Regularly clean the interior of the valves to remove oil stains and impurities (especially the intake regulating valve which is prone to dust influence). Replace the seals and wear parts (such as diaphragms, springs) according to the manual schedule. Calibrate the pressure setting values to ensure they match the system requirements. In case of faults, prioritize replacing the original factory-regulated valves (such as Atlas Copco-specific parts) to avoid system instability due to size or performance mismatch.

When purchasing, it is recommended to provide the specific model information of the air compressor through our Atlas Copco distributors to obtain the matching genuine carbon seals, ensuring compatibility with the equipment and guaranteeing the sealing effect. During installation and replacement, it is also necessary to be operated by professional technicians to achieve the best sealing performance.

Regularly replacing the Atlas Copco filter and separator kits is an important measure for maintaining the good performance of the air compressor, reducing energy consumption and lowering the risk of failures.

Installation and Maintenance Tips: Professional Installation: Operated by authorized technicians to ensure correct connection of the oil/gas interfaces and proper installation of the seals (especially for water-cooled models, prevent water leakage). Cleaning and Maintenance: Wind-cooled models: Regularly clean the surface dust and oil stains of the heat sinks (using compressed air blowing or special cleaning agents). Water-cooled models: Regularly check the water quality to prevent scale deposition (add scale inhibitors), and conduct at least one flushing cleaning per year. System Inspection: After replacing the cooler, check if the auxiliary components such as fans and water pumps (for water-cooled models) are functioning properly to ensure the effective Cooperation of the cooling system. The cooler kit is the core spare part for maintaining the thermal balance of the air compressor. Choosing original factory parts can maximize the guarantee of equipment performance and safety.