China 1901902344 Atlas Copco Manufacturer, Supplier, Factory

Atlas Copco 1900520013 Work mode Atlas Copco 1900520013 Constant pressure control: Maintains the exhaust pressure within the range of the set value ±0.1bar, Atlas Copco 1900520013 suitable for precision gas usage scenarios Atlas Copco 1900520013 Load/unload mode: Unloads when the pressure reaches the upper limit and loads when it drops below the lower limit. Higher energy consumption Atlas Copco 1900520013 Variable frequency control: Achieves stepless speed regulation by adjusting the motor frequency, with significant energy-saving effect (15-35% more energy-efficient than fixed-speed models) Atlas Copco 1900520013 Multi-machine linkage: Multiple air compressors work together, automatically distributing the load according to the total gas usage demand

Atlas Copco 0663210793，The O-ring is a seemingly insignificant yet crucial sealing component. It fills the gaps between components through elastic deformation and is responsible for ensuring the efficient sealing of liquid and gas media by the air compressor. They are suitable for secondary static and dynamic uses. The O-ring can be sealed radially or axially as a whole. The sealing is achieved during assembly through axial or radial movement within the air compressor. Although the O-ring is small, it is the key to ensuring the sealing performance, efficiency, and lifespan of the equipment. Correct selection, proper installation, and meticulous maintenance are crucial.

Maintenance recommendations for the oil filter of Atlas Copco screw air compressors: Replacement cycle: Under normal operating conditions, replace the filter once every 2,000 - 3,000 hours. In harsh environments (such as high dust and high temperature), this period should be shortened to 1,500 hours. Synchronous operation: When replacing the filter element, also simultaneously discharge the settled oil at the bottom of the oil tank (containing a large amount of impurities) and refill the oil to the specified level. Selection requirements: It is necessary to select original factory or certified filter elements that match the compressor model to avoid equipment damage due to size mismatch or insufficient filtration accuracy. Effective maintenance of the oil filter can significantly reduce the wear rate of the screw main unit and is a key aspect of the daily maintenance of the compressor unit with low cost and high efficiency.

Atlas Copco 1627456071,The lubricating oil for air compressors is the core medium that ensures the efficient and stable operation of the equipment. Its multi-functional nature requires the lubricating oil to possess appropriate viscosity, high flash point, good oxidation resistance and anti-emulsification properties, among other performance indicators 68. Different compressor types (such as screw type and piston type) and operating conditions (temperature, load) require the selection of specific types of lubricating oil (mineral oil, semi-synthetic or fully synthetic oil), and regular replacement is necessary to prevent performance degradation and resulting equipment failures.

Why is lubricating oil used for the screw rod? 1.Reduce friction: The grease can form a lubricating film on the surface of the screw rod, reducing the friction coefficient and thereby minimizing wear and heat generation. 2.Preventing rust: The grease has certain anti-corrosion properties, which can prevent the screw rod from rusting due to oxidation or moisture. 3.Transmitting power: A certain oil film is formed between the screw rods, which helps to smoothly transmit power, reducing mechanical vibration and noise. 4.Sealing function: The grease performs the sealing function, preventing dust and moisture from entering the screw rod. 5.Anti-rust and anti-corrosion: Lubricating grease is an excellent anti-rust and anti-corrosion agent.

Atlas Copco 3001517000,The maintenance core of Atlas Copco air filters lies in regular cleaning and replacement of the filter elements. It is recommended to remove the filter elements every week and use compressed air to blow off the dust on the surface. The normal service life of the filter element is usually around 1500 to 2000 hours. However, if the environment has a lot of dust, the replacement cycle should be shortened to 3-6 months. When the air filter indicator light on the control panel is on, it is also necessary to clean or replace it promptly. The maintenance of the water filter mainly involves regular drainage of condensate water and cleaning or replacement of the filter cup. The material of the filter cup is diverse, and during maintenance, it is necessary to follow its characteristics. Plastic filter cups should avoid being scratched with metal tools. Generally, it is recommended to clean once a month and replace once every 6 months.