China 1900520013 Manufacturer, Supplier, Factory

Common Problems and Maintenance of Atlas Copco Oil Separator Reduced separation effect Reason: Filter blockage, damage, poor return oil pipeline, or excessively high temperature of the oil-gas mixture . Solution: Replace the filter, clean the return oil pipe, and check the cooling system to ensure the exhaust temperature is normal . Excessive pressure difference Sign: The pressure difference between the separator inlet and outlet exceeds 0.15MPa, resulting in reduced exhaust volume and increased energy consumption. Solution: Replace the filter in time to avoid filter damage or overload of the housing due to excessive pressure difference. Return oil failure Reason: Return oil valve blockage, throttling hole blockage, or leakage of the return oil pipe. Harm: The compressor operates without oil, causing wear of the main unit and sudden temperature rise. Solution: Disassemble and clean the return oil components to ensure smooth return oil.

Atlas Copco 3001160210,The air contains solid impurities such as dust, sand particles, and fibers. If these impurities enter the interior of the air compressor along with the air, they will cause wear on the components of the air compressor. For example, in a piston-type air compressor, the impurities may intensify the friction between the piston ring and the cylinder wall, shortening the service life of the piston ring and the cylinder. In a screw-type air compressor, the impurities may enter the gap between the screw rotors, affecting the normal operation of the rotors and causing accelerated wear of the rotors, and even potentially resulting in severe faults such as rotor jamming.The air filter can effectively intercept solid particles in the air, ensuring that the content of solid particles in the compressed air output complies with relevant standards. In some application scenarios where the quality of compressed air is highly demanded, such as in the food, pharmaceutical, and precision instrument manufacturing industries, even tiny solid particles can affect product quality or equipment operation.

Due to outstanding performance and flexible operation,GA5 GA7 GA11 Atlas Copco Rotary Screw Air Compressorss are in a leading position in the market. These features bring you maximum productivity while minimizing the total cost of ownership. GA compressors are available in the following two series: GA 5-11 and GA 5-15 VSD. GA 5-11 is the best factory solution and performs well even in the most difficult environment. GA 5-15 VSD is an ideal solution for production environments with fluctuating air demand to optimize energy consumption. Both series can provide the high-quality air you need to keep the ventilation net clean and the production running normally.

Atlas Copco Gear Trial Run and Inspection Preliminary Inspection Manually rotate the gear shaft to feel if the rotation is smooth, and check for any sticking, abnormal noise or eccentric vibration. Check if the lubrication path in the gearbox is unobstructed, and add gear oil to the standard level as per the regulations. No-load Trial Run Connect the power supply and conduct a short-term (5-10 minutes) no-load operation. Listen for any abnormal noises (such as metal friction sounds, high-frequency squeals) from the gearbox. After stopping the machine, check the temperatures of the bearings and gears (should not exceed the ambient temperature by 40°C), and observe for any oil leakage. Load Test Gradually load to the rated pressure and run for more than 30 minutes. Recheck the noise, temperature and sealing conditions, and confirm there are no abnormalities.

Atlas Copco 2901100900,The fan switch is an important control component of the air compressor cooling system. It is used to automatically control the start and stop of the fan, so as to keep the air compressor running within the optimal working temperature range and prevent overheating from damaging the equipment.

If you are looking for Genuine Original 1625213401-1625837101-1630060412 Fan Radial Atlas Copco or any other related fan assemblies part numbers for any Atlas Copco compressors,Taike Trading Co., Ltd. Will provide you the best prices. Based in China, growing to be one of the main online air compressors and spare parts suppliers, our prices are unbeatable, while the quality it 100% genuine original.