China 1630390411 Manufacturer, Supplier, Factory

If you are looking for “Atlas Copco Genuine Original” Atlas Copco 1622319772-1622858772 Fan or any other related fan assemblies part numbers for any Atlas Copco compressors, Taike Trading Co., Ltd. can provide you the best prices. Based in China, growing to be one of the main online air compressors and spare parts suppliers, our prices are unbeatable, while the quality it 100% genuine original.

Where can I get the genuine original Part ATLAS COPCO 2901990038 KIT MAINTENANCE 8000 HRS? Here you are lucky to find a reliable China supplier. Contact taike for the latest price and availability as well as delivery time for any “real Genuine Orginal Epiroc Parts” Now.

Common Issues and Maintenance of Atlas Copco Air Compressor Pressure Sensors Common issues with pressure sensors include measurement drift , signal interruptio, interface leakage, etc. Maintenance suggestions: Regularly check the sealing of the sensor installation to avoid pressure leakage or measurement errors due to looseness; Keep the sensor interface clean to prevent oil contamination and impurities from blocking and affecting the measurement; When there is abnormal pressure display, frequent start-stop of the unit, or incorrect pressure protection operation, it is necessary to check if the sensor is faulty. It is recommended to replace the original sensor to ensure performance matching. When replacing, pay attention to keeping the calibration parameters consistent with the original model.

Quick conclusions and suggestions for Atlas Copco air compressors using ball bearings The original factory / joint design of four-point contact ball bearings on the oil-free main shaft ensure positioning accuracy and lifespan. The motor end uses protective bearings that are compatible with the frequency converter. Emphasize lubrication and grounding / insulation to reduce the risk of bearing current. Replace based on the machine nameplate and serial number as the standard, avoid blindly replacing based solely on the "universal replacement number".

Maintenance recommendations for the oil filter of Atlas Copco screw air compressors: Replacement cycle: Under normal operating conditions, replace the filter once every 2,000 - 3,000 hours. In harsh environments (such as high dust and high temperature), this period should be shortened to 1,500 hours. Synchronous operation: When replacing the filter element, also simultaneously discharge the settled oil at the bottom of the oil tank (containing a large amount of impurities) and refill the oil to the specified level. Selection requirements: It is necessary to select original factory or certified filter elements that match the compressor model to avoid equipment damage due to size mismatch or insufficient filtration accuracy. Effective maintenance of the oil filter can significantly reduce the wear rate of the screw main unit and is a key aspect of the daily maintenance of the compressor unit with low cost and high efficiency.

The combined effect of the air filter and the oil filter assembly in Atlas Copco air compressors The air filter purifies the incoming air, reducing impurities that enter the system and indirectly reducing the burden on the oil filter assembly; The oil filter assembly separates the oil from the compressed air, ensuring the quality of the outgoing air and simultaneously recovering the lubricating oil and reducing operating costs. The decline in the performance of either component will affect the efficiency of the air compressor: blockage of the air filter will result in insufficient air intake and increased energy consumption; failure of the oil filter assembly will cause the compressed air to contain excessive oil, polluting downstream equipment or products.