China 1630390411 FILTER AIR INLET Manufacturer, Supplier, Factory

Atlas Copco 2202207986 is made of high-strength cast iron and steel. It has sufficient rigidity and wear resistance, and is suitable for the long-term high-speed operation range of 500 - 3000 rpm of the machinery.

Atlas Copco Air Compressor Solenoid Valve Common Types and Maintenance Tips Types: Depending on the function, it may include intake valve solenoid valve, discharge solenoid valve, and waste gas solenoid valve, etc. The specific model needs to match the series and specifications of the air compressor (such as GA series, GHS series, etc.). Maintenance: Regularly check the sealing performance of the solenoid valve to prevent air leakage that affects system efficiency. Keep the solenoid valve clean to avoid jamming or malfunction due to oil stains, dust, and other impurities. If there is a solenoid valve failure (such as inability to switch normally, abnormal noise), it is necessary to replace the corresponding original factory parts in time to ensure the performance and safety of the air compressor.

Fault and Replacement Suggestions: If the thermostat valve gets stuck (unable to open or close), it will cause: Low oil temperature (always bypassing the cooler): The high viscosity of the oil increases the load on the engine and energy consumption; High oil temperature (always on the cooling): Especially in low-temperature environments, the oil heats up slowly, and the lubrication effect declines. Suggestions: When you notice abnormal oil temperature (deviating from the normal range by more than ±10℃), check the status of the thermostat valve; When there is a fault, replace the original factory thermostat valve to avoid using an alternative part that leads to insufficient temperature control accuracy; When replacing, clean the pipe interface to ensure the correct installation direction of the valve (according to the arrow indication on the valve body), to prevent installation in the wrong position from affecting the function.

How to choose (quickly) Specify the model: Fixed oil injection screw (GA/GX etc.) or mobile air compressor. Key points of working conditions: Ambient temperature, pressure level, whether it is hot / humid / dusty, whether it is in contact with food. Prioritize original factory oil: Highly compatible with seals, oil separation, oil filters and temperature control valves to reduce the risks of oil bubbles, carbon deposits and abnormal fuel consumption.

The air compressor oil filter is a key component of the lubrication system of an air compressor. It is mainly used to filter impurities, particles and contaminants in the lubricating oil, ensuring that the lubricating oil entering the compressor meets the cleanliness standards, thereby protecting the internal components of the compressor (such as bearings, gears, rotors, etc.) from wear and damage, and extending the service life of the equipment. Core functions Impurity filtration Intercept solid particles such as metal debris, dust, and carbon deposits, preventing them from circulating into the working components of the compressor. System protection Reduce friction and wear, lower the risk of faults caused by contaminants, and improve the reliability of the compressor. Oil life extension Remove oxidation products and moisture, delay the aging and deterioration of the lubricating oil, and reduce the frequency of oil replacement.

Installation and Maintenance Tips: Professional Installation: Operated by authorized technicians to ensure correct connection of the oil/gas interfaces and proper installation of the seals (especially for water-cooled models, prevent water leakage). Cleaning and Maintenance: Wind-cooled models: Regularly clean the surface dust and oil stains of the heat sinks (using compressed air blowing or special cleaning agents). Water-cooled models: Regularly check the water quality to prevent scale deposition (add scale inhibitors), and conduct at least one flushing cleaning per year. System Inspection: After replacing the cooler, check if the auxiliary components such as fans and water pumps (for water-cooled models) are functioning properly to ensure the effective Cooperation of the cooling system. The cooler kit is the core spare part for maintaining the thermal balance of the air compressor. Choosing original factory parts can maximize the guarantee of equipment performance and safety.