China 1624117200 Manufacturer, Supplier, Factory

Maintenance and servicing tips for the tubular coolers of Atlas Copco compressors: Regular cleaning: Depending on the operating environment, clean the inside and outside of the cooling tubes of the tubes and the sealing surfaces of the caps (using chemical cleaning or mechanical flushing) to prevent a decline in heat exchange efficiency. Leak detection: Check for any leaks at the pipe connections and sealing surfaces of the caps. Replace the seals or repair damaged pipes in a timely manner. Flow monitoring: Ensure that the flow and pressure of the cooling medium (water or air) are within the specified range. If insufficient, investigate pipe blockages or pump/fan failures. Anti-freezing protection： In low-temperature environments， after shutdown， drain the accumulated water in the cooling water pipes to prevent cracking due to freezing.

Atlas Copco Installation and Maintenance Guidelines During installation, it is necessary to clean the oil stains and impurities from the surface of the distance ring, ensuring a tight fit with the mating parts without any gaps or skew. Avoid striking the edge of the distance ring (especially thin-walled parts), as this may cause deformation and affect the dimensional accuracy. During maintenance and inspection, check if the distance ring is worn, deformed or cracked. If any abnormalities are found, it should be replaced promptly; otherwise, it may lead to a decrease in the assembly quality and operational stability of the air compressor, causing vibration, abnormal noise or leakage, etc. Although the distance ring is a small standard part, its accuracy directly affects the assembly quality and operational stability of the air compressor. When selecting and installing, it is necessary to strictly follow the requirements of the equipment manual.

Original Equipment Parts and Replacement Considerations The Atlas Copco gear set is a core component. It is recommended to preferentially use original equipment parts . The advantages of using original equipment parts are as follows: It perfectly matches the parameters of the main unit and the motor, ensuring transmission efficiency The material and processing accuracy meet strict standards, and the lifespan can reach 8-150,000 hours If alternative parts are chosen, the gear module, tooth count, tooth profile , center distance, etc. must be strictly verified to avoid operational failures due to size deviations. In summary, the Atlas Copco air compressor gear set, with its high-precision design and high-quality materials, ensures efficient transmission of the equipment. However, it is necessary to conduct regular maintenance to extend its service life and avoid the entire machine stopping due to gear failures.

Compressors operate in many different types of environment, affecting the inlet air. Impurities, such as dust particles, are mostly invisible to the naked eye. But they can cause damage to the compressor element, reducing its efficiency or even causing failure. They can also make the lubricant age faster and disrupt its capacity to protect metal components.

Atlas Copco Check Valve Kit for Oil-Free Compressor Maintenance and Replacement Regular Inspection: Regularly check the sealing performance of the valve disc. If leakage occurs (such as a rapid drop in pressure after shutdown), replace the sealing element or the entire kit promptly. Advantages of Original Equipment Kit: The size accuracy and material performance of the original equipment kit are fully matched with the design of the oil-free compressor, avoiding secondary pollution or equipment damage due to compatibility issues. It is especially suitable for industries with extremely high air quality requirements (such as food, medicine, electronics). If you need to purchase or confirm the specific model referring to the corresponding number in the official Atlas Copco accessory manual to ensure the compatibility of the kit with the equipment and guarantee the safety and air quality of the system.

Maintenance instructions for the intake valve repair kit of Atlas Copco air compressors When the compressor experiences insufficient intake volume, unstable pressure, difficulty in discharging, or abnormal increase in energy consumption, it may be related to the malfunction of the intake valve. It is recommended to check and use the original repair kit for repair. During the maintenance process, follow the standard procedures in the equipment manual to ensure the correct installation of parts (such as the direction of the sealing ring, the pre-tightening force of the spring, etc.). In necessary cases, professional technicians should operate to ensure the quality of the repair.