China 1613610590 Manufacturer, Supplier, Factory

How to choose (quickly) Specify the model: Fixed oil injection screw (GA/GX etc.) or mobile air compressor. Key points of working conditions: Ambient temperature, pressure level, whether it is hot / humid / dusty, whether it is in contact with food. Prioritize original factory oil: Highly compatible with seals, oil separation, oil filters and temperature control valves to reduce the risks of oil bubbles, carbon deposits and abnormal fuel consumption.

Replacement and Maintenance: Gaskets are wear-prone parts. They should be checked and replaced promptly during regular maintenance of the air compressor or when leakage occurs. During the replacement process, ensure the installation surface is clean to avoid poor sealing due to impurities. Also, follow the specifications in the equipment manual for proper operation to ensure a proper installation.

Common Problems and Maintenance of Atlas Copco Oil Separator Reduced separation effect Reason: Filter blockage, damage, poor return oil pipeline, or excessively high temperature of the oil-gas mixture . Solution: Replace the filter, clean the return oil pipe, and check the cooling system to ensure the exhaust temperature is normal . Excessive pressure difference Sign: The pressure difference between the separator inlet and outlet exceeds 0.15MPa, resulting in reduced exhaust volume and increased energy consumption. Solution: Replace the filter in time to avoid filter damage or overload of the housing due to excessive pressure difference. Return oil failure Reason: Return oil valve blockage, throttling hole blockage, or leakage of the return oil pipe. Harm: The compressor operates without oil, causing wear of the main unit and sudden temperature rise. Solution: Disassemble and clean the return oil components to ensure smooth return oil.

Atlas Copco Air Compressor Oil Pipe Maintenance and Replacement Regular Inspection: It is necessary to regularly check whether the oil pipes have hardened, cracked, bulged, loose joints or leakage. Especially during the equipment maintenance period, key inspections should be conducted. Timely Replacement: If the oil pipes are found to be aging or damaged, they should be replaced immediately with oil pipes that meet the original factory specifications to avoid oil leakage causing the equipment to run without sufficient lubrication, resulting in severe faults such as excessive wear of the main unit and overheating.

The metal control panel instrument controller switch assembly of the Atlas Copco mobile air compressor, usage and maintenance precautions: Regularly clean the surface of the panel to prevent dust accumulation from affecting observation and operation; check the flexibility of the switch buttons to prevent sticking. Fasten the fixing screws of the panel to prevent components from loosening or poor contact due to equipment vibration. When replacing components, select original factory parts to ensure that they match the electrical parameters and installation dimensions of the model (such as XAS, XR series of mobile compressors). In humid environments, pay attention to protection to prevent moisture from seeping into the interior and causing circuit short circuits.

Atlas Copco Gear Maintenance Tips Regular Inspection: Observe the condition of the gear tooth surface, measure the tooth clearance, and replace them immediately if any abnormalities are found. Lubrication Management: Use dedicated gear oil (or air compressor-specific oil), replace it regularly, and keep the oil level normal to avoid oil contamination. Installation Calibration: Ensure that the parallelism and perpendicularity of the gear shaft meet the requirements, and avoid uneven load operation. Load Control: Prevent the air compressor from operating under long-term overloading conditions, and reduce the fatigue damage to the gears. The design and maintenance of air compressor gears are crucial for the overall performance of the machine. High-precision gear combinations with a good lubrication system can significantly reduce operating noise, extend service life, and ensure the efficient and stable operation of the air compressor.