News

Atlas Copco's metal oil pump component service kit replacement and maintenance recommendations for the ZR/ZL 55-90 series screw air compressors When there are abnormal oil pump noises, fluctuating supply pressure, insufficient lubricating oil flow, or oil leakage in the oil circuit, it is recommended to check the oil pump status and use this service kit for maintenance. During the replacement process, strictly follow the procedures in the equipment manual to operate and ensure the correct installation of the components (such as the gear meshing position and the assembly direction of the seals), and conduct a pressure test after the repair to confirm that the performance of the oil pump has returned to normal.

Maintenance instructions for the intake valve repair kit of Atlas Copco air compressors When the compressor experiences insufficient intake volume, unstable pressure, difficulty in discharging, or abnormal increase in energy consumption, it may be related to the malfunction of the intake valve. It is recommended to check and use the original repair kit for repair. During the maintenance process, follow the standard procedures in the equipment manual to ensure the correct installation of parts (such as the direction of the sealing ring, the pre-tightening force of the spring, etc.). In necessary cases, professional technicians should operate to ensure the quality of the repair.

Maintenance and replacement instructions for the transmission shaft seal kit of Atlas Copco screw air compressors If oil stains or oil leakage are observed near the transmission shaft, or if the consumption of compressor lubricating oil increases abnormally, it may be due to the aging or damage of the seal kit. Therefore, it is necessary to check and replace it in time. When replacing, it is recommended to use the original kit and operate in accordance with the equipment manual to ensure that the seal is installed in the correct direction and tightly attached. In case of necessity, special tools can be used for installation to avoid deformation or damage to the seal.

Maintenance and replacement instructions for the transmission shaft seal kit of Atlas Copco screw air compressors If oil stains or oil leakage are observed near the transmission shaft, or if the consumption of compressor lubricating oil increases abnormally, it may be due to the aging or damage of the seal kit. Therefore, it is necessary to check and replace it in time. When replacing, it is recommended to use the original kit and operate in accordance with the equipment manual to ensure that the seal is installed in the correct direction and tightly attached. In case of necessity, special tools can be used for installation to avoid deformation or damage to the seal.

Atlas Copco's original oil cooler replacement and maintenance suggestions for ZA ZR5-6 screw air compressors When abnormal oil temperature rise, cooling effect decline or cooler leakage occur, it is necessary to promptly inspect and replace the oil cooler. It is recommended to choose original parts to ensure compatibility and performance. During the replacement process, follow the equipment maintenance manual's specifications to ensure a good installation seal and avoid oil leakage or air entering the system.

The original Atlas Copco metal screw-type air compressor OSE kit application scenarios It is mainly used for the regular preventive maintenance of air compressors (such as maintenance based on operating hours or time periods), or as a replacement part for repairs when the equipment has specific faults. It is recommended to select the corresponding OSE kit according to the model of the air compressor (such as GA, G series, etc.) and the maintenance plan in the user manual.