Industry News

Atlas Copco Purchase and Usage Recommendations Atlas Copco Model Matching: Select the corresponding kit based on the brand of the oil-free air compressor and the gearbox model (such as transmission power, reduction ratio). Avoid mismatched tool sizes or spare parts specifications. Atlas Copco Original Equipment Manufacturer Priority: It is recommended to choose the maintenance kit certified by the air compressor manufacturer to ensure that the material of spare parts (such as bearing accuracy grade, sealing performance resistance to aging) is consistent with the design standards of the gearbox. Atlas Copco Usage Specifications: Follow the maintenance manual provided with the kit, especially the torque parameters (such as the bolts of the gearbox cover usually require 25-35N·m) and the amount of lubricating grease (excessive may cause temperature rise).

Purchase Suggestions Prioritize choosing genuine Atlas Copco products, original factory kits or certified aftermarket products from the manufacturer to ensure that the filtration accuracy, pressure resistance performance, etc. meet the design standards of the DD160 air compressor; Check the model identification on the kit packaging (such as filter core number, compatible model code), to avoid mismatched equipment failure; Keep the replacement records, and based on the equipment operation time and environmental conditions, formulate personalized maintenance cycles (shorter replacement intervals are required in harsh environments).

The Function and Importance of Atlas Copco Air Compressor Motor Shock Absorbers Protecting Equipment: Reduces the impact of motor vibration on the main unit, pipelines, and instruments of the air compressor, and reduces the wear of components such as bearings and couplings. Reducing Noise: Blocks the transmission path of vibration, reducing the equipment operation noise by 10-20 dB(A), meeting the environmental protection standards for workshop noise. Stable Operation: Avoids pipe loosening and instrument malfunction caused by vibration, ensuring the stability of the compressed air output pressure. Choosing the appropriate shock absorber spare parts from Atlas Copco and conducting regular maintenance is an important measure to ensure the long-term stable operation of the air compressor motor.

Atlas Copco Common Problems and Risks Oil emulsification: This often occurs due to the failure to promptly drain condensate (such as when the drain valve of the oil separator is blocked). Regular drainage is necessary. After emulsification, the oil must be replaced immediately and the drainage system checked. Oil carbonization: Due to poor oxidation stability of the oil or excessive exhaust temperature (failure of the cooling system), carbon deposits will clog the core of the oil separator and the oil filter, resulting in increased pressure loss and increased energy consumption. In severe cases, it can cause the main unit to freeze. Abnormal oil level: Low oil level will lead to insufficient lubrication and cooling; high oil level will cause excessive oil content in the exhaust (the oil separator does not separate thoroughly), and oil needs to be added or drained according to the scale on the oil level gauge.

Regularly replacing the Atlas Copco filter service kits is a crucial measure for maintaining the efficient operation and prolonging the lifespan of the air compressor. It can reduce energy consumption (by minimizing power loss caused by excessive filtration resistance) and the risk of failures, while ensuring the quality of compressed air.

Regularly replacing the Atlas Copco original oil separator kit is crucial for maintaining the efficient and stable operation of the GA90-110(W) series air compressors. It can reduce the failure rate, extend the equipment lifespan, and ensure the quality of compressed air.