Industry News

Atlas Copco Installation and Maintenance Guidelines During installation, it is necessary to clean the oil stains and impurities from the surface of the distance ring, ensuring a tight fit with the mating parts without any gaps or skew. Avoid striking the edge of the distance ring (especially thin-walled parts), as this may cause deformation and affect the dimensional accuracy. During maintenance and inspection, check if the distance ring is worn, deformed or cracked. If any abnormalities are found, it should be replaced promptly; otherwise, it may lead to a decrease in the assembly quality and operational stability of the air compressor, causing vibration, abnormal noise or leakage, etc. Although the distance ring is a small standard part, its accuracy directly affects the assembly quality and operational stability of the air compressor. When selecting and installing, it is necessary to strictly follow the requirements of the equipment manual.

The Atlas Copco air compressor oil level indicator, although having a simple structure, is of vital importance for the safe operation of the equipment. During daily inspections, special attention should be paid to whether the oil level is normal and whether the oil quality has deteriorated. This ensures that the lubricating, cooling and sealing functions of the lubricating oil are fully exerted, thereby extending the service life of the air compressor.

Atlas Copco muffler maintenance and replacement Regularly clean the filter components of the intake muffler to prevent blockage and reduce intake volume (especially in dusty environments). Check if the muffler is damaged or loose. If the sound-absorbing material is exposed or the structure is deformed, it needs to be replaced in time; otherwise, the noise reduction effect will significantly decrease. The general service life is 1-3 years (depending on the usage environment). For high-frequency use or in harsh environments, the replacement cycle should be shortened. Choosing the appropriate air compressor muffler can not only meet the environmental protection and noise reduction requirements, but also ensure the stable operation of the equipment. It is an indispensable auxiliary device for the air compressor system.

The GVs R series is a robust and highly regarded range of vacuum pumps with a technologicallyadvanced design that is 'Made in India, The GVs R series are single stage, oil-sealed vacuumpumps that operate according to the proven oil-sealed rotary vane principle that has beensuccessfully used for many years in all general vacuum applications of the industry.

Atlas Copco The air compressor temperature sensor is an important component used for real-time monitoring of the temperatures of key parts of the compressor unit (such as exhaust temperature, oil temperature, and motor temperature, etc.). Its core function is to detect temperature changes and provide data support for the control system, ensuring that the equipment operates within a safe temperature range. At the same time, when abnormal temperatures occur, it triggers protection mechanisms (such as shutdown and alarm) to prevent mechanical failures or safety risks caused by overheating.

Function: Filtering impurities: During the operation of the air compressor, the lubricating oil will generate metal debris due to friction with metal components, and the oil itself will also produce gums and other impurities due to heating and oxidation with air. The oil filter can effectively remove these impurities, such as metal particles and deteriorated oil substances. The filtration accuracy is usually between 5-15 μm, maintaining the cleanliness of the oil passage, preventing impurities from entering critical components such as bearings, gears, and main body cavities, reducing wear and extending the service life of the equipment. Ensuring lubrication effect: Ensure that the oil entering the main unit is pure, maintain good lubrication performance, allow the friction surfaces to be fully lubricated, reduce friction loss, and avoid faults caused by poor lubrication due to impurities, such as bearing damage, rotor seizing, etc.