Air compressor spare parts

Atlas Copco Common Problems and Solutions Slip and Abnormal Noise: This is often caused by loose belts, oil contamination, or wear on the pulley grooves. Adjust the tension, clean, or replace the pulley. Excessive Breakage: This may be due to excessive tension, incorrect belt type, misaligned pulley grooves, or excessive load. Check and adjust as necessary. Severe Heating: This is usually caused by slipping or poor heat dissipation. Stop the machine immediately for inspection.

If the muffler is clogged or damaged, it will cause an increase in intake/exhaust resistance, which may affect the gas production efficiency of the air compressor. Regular inspection and maintenance are necessary. For large air compressor systems, it is recommended to adopt comprehensive noise reduction measures such as soundproof rooms and vibration isolators for better results.Well-known brands (such as Atlas Copco, Ingersoll Rand, etc.) all have corresponding air compressor mufflers. Depending on the specific model, original factory parts or third-party products that meet the specifications can be selected.

"D70" might refer to the diameter specification of the conveying disc (such as 70mm), which is used to accommodate materials of specific sizes (such as small fasteners, accessories, etc.); "10" might be related to the rated conveying capacity, the applicable pressure parameters (such as 10bar), or the installation interface specifications.

Its core features typically include: An air-driven design, suitable for working conditions that require high power output and have a demand for portability, especially in environments without power supply or where explosion prevention is necessary. 15 may represent parameters related to specifications, such as the diameter of the grinding wheel (e.g. 150mm), which should be referred to in the product manual. It usually has an ergonomic handle to reduce fatigue during long operations. It may be equipped with adjustable speed function or safety locking device to enhance operational safety and flexibility.

The Atlas Copco CUBICLE FILTER cabinet-type filter achieves refined purification, which not only ensures the normal operation of downstream equipment but also reduces product quality issues caused by compressed air pollution. It is a key device for improving the quality of compressed air in the air compressor system.

Failure causes and maintenance suggestions for Atlas Copco Air compressor O-ring Common failure causes: Long-term high-temperature aging leads to reduced elasticity, wear or scratches (such as impurities entering the sealing surface), improper installation (such as twisting, being too tight), incorrect selection (material not suitable for the medium or temperature). Maintenance precautions: Regularly inspect the condition of the O-ring. Replace it promptly if it shows signs of hardening, cracking, deformation or leakage. When replacing, clean the sealing groove and mating surface, remove oil stains, burrs and impurities. Avoid using sharp tools to scratch the O-ring during installation. If necessary, apply special lubricating grease (compatible with the medium) to assist in installation. Select matching specifications and materials for the O-ring based on the air compressor model and location.It is recommended to use original factory parts to ensure the sealing effect.