China WUX air Compressor Regul Valve Manufacturer, Supplier, Factory

For the 55th type of oil of Atlas Copco air compressors, the following points should be noted during use: It is necessary to strictly follow the requirements of the air compressor's operation manual to regularly check the oil level and quality, and replace it with the 55th type of dedicated oil that meets the specifications in a timely manner. Avoid mixing different models or brands of oil to prevent affecting the normal operation and lifespan of the air compressor. When changing the oil, it is recommended to clean the related filtration system at the same time to ensure the lubrication effect.

Atlas Copco Ventilation Pipe Component Application and Maintenance Recommendations Application Scenario: Primarily used for the ventilation system setup in air compressor rooms, especially in enclosed or poorly ventilated environments, where the use of ventilation pipe components is necessary to optimize air circulation and maintain the room temperature within the equipment's allowable range (generally recommended not to exceed 40℃). Maintenance Points: Regularly inspect the ventilation pipes for any damage, deformation, or loose connections to ensure there is no air leakage; Clean the dust accumulation in the pipes to prevent blockages that affect air volume; For flexible connection pipes, check for aging, cracking, and replace them in a timely manner to ensure their elasticity and sealing performance.

Regularly replacing the Atlas Copco filter service kits is a crucial measure for maintaining the efficient operation and prolonging the lifespan of the air compressor. It can reduce energy consumption (by minimizing power loss caused by excessive filtration resistance) and the risk of failures, while ensuring the quality of compressed air.

Atlas Copco muffler maintenance and replacement Regularly clean the filter components of the intake muffler to prevent blockage and reduce intake volume (especially in dusty environments). Check if the muffler is damaged or loose. If the sound-absorbing material is exposed or the structure is deformed, it needs to be replaced in time; otherwise, the noise reduction effect will significantly decrease. The general service life is 1-3 years (depending on the usage environment). For high-frequency use or in harsh environments, the replacement cycle should be shortened. Choosing the appropriate air compressor muffler can not only meet the environmental protection and noise reduction requirements, but also ensure the stable operation of the equipment. It is an indispensable auxiliary device for the air compressor system.

Basic working principle A three-phase induction motor generates a rotating magnetic field by connecting to three-phase alternating current and passing it through the stator windings. The rotor cuts the magnetic lines of force in the magnetic field, generating an induced current, which is then subjected to electromagnetic force and rotates in accordance with the magnetic field (the rotational speed is slightly lower than that of the rotating magnetic field, and there is a slip rate). The electrical energy is converted into mechanical energy to drive the compression mechanism of the air compressor (such as pistons, screws, etc.) to operate. Adaptation features

Attention to the Atlas Copco Adsorption Dryer Silencer: During installation, ensure that the sealing gasket is intact to prevent air leakage, which could lead to increased noise and reduced regeneration efficiency; Do not replace it with an incompatible model at will (for example, if the diameter is too small, it will cause excessive exhaust resistance, affecting the regeneration effect of the adsorbent); The original factory silencer is usually designed with acoustic optimization, not only providing better noise reduction effects, but also ensuring the smoothness of the regeneration exhaust and maintaining the normal cycle of the dryer.