China OIL SPARE PART Manufacturer, Supplier, Factory

Key Points for Bolt Installation and Maintenance of Atlas Copco Pre-tightening Torque: Appropriate torque should be applied according to the bolt's strength grade and connection requirements . Excessive torque can cause the bolt to break, while insufficient torque may result in poor sealing or loosening. Surface Treatment: The bolt surface is usually galvanized, phosphated , or oxidized . Before installation, check the surface for rust or damage. Cooperation Precision: The cooperation between the bolt and the nut or the bolt hole must comply with standards . Avoid overly loose or overly tight threads. Regular Inspection: After the air compressor has been running for a period of time, check if the bolts are loose. If rust, deformation, or fracture is found, replace the bolts of the same specification and strength in a timely manner.

2901990561 KIT PDP SENSOR-100C + 20C To ensure the measurement accuracy and performance of the sensor, it is recommended to calibrate and maintain the sensor regularly. The specific maintenance cycle and methods can be referred to in the product manual or the technical documents of Atlas Copco.

Attention for the suction control valve of Atlas Copco air compressors: After replacing or repairing the suction control valve, it is necessary to recalibrate the pressure setting value to ensure it matches the system requirements. Avoid using non-original factory parts to prevent abnormal operation of the compressor due to size deviations or material issues.

Maintenance suggestions: During installation, it is necessary to check whether the sealing surface of the flange is in good condition. Use the original factory sealant gasket and tighten the bolts according to the specified torque. This is to prevent air leakage or damage to the components due to improper installation.

Maintenance and replacement precautions for the pressure valves of Atlas Copco industrial air compressors: Regularly check the sealing performance and adjustment accuracy of the pressure valves. If there are problems such as excessive pressure fluctuations, leakage, or inability to relieve pressure, timely maintenance is required. When replacing, use original Atlas Copco parts to ensure compatibility with the compressor model and avoid system failures due to parameter mismatch. Maintenance or adjustment should be carried out by professional technicians. Follow the equipment manual specifications strictly to prevent safety risks caused by incorrect pressure settings.

Atlas Copco is a world-leading industrial equipment manufacturer, with a century-long history and profound technical expertise in the field of air compressors. As a benchmark enterprise in the compressor industry, its products are renowned for their efficiency, reliability and innovation, and are widely used in various sectors such as manufacturing, energy, healthcare, and construction.