China KIT SERVICE FOR OIL INJECTED SCREW COMPRESSORS Manufacturer, Supplier, Factory

Common Problems and Maintenance of Atlas Copco Oil Separator Reduced separation effect Reason: Filter blockage, damage, poor return oil pipeline, or excessively high temperature of the oil-gas mixture . Solution: Replace the filter, clean the return oil pipe, and check the cooling system to ensure the exhaust temperature is normal . Excessive pressure difference Sign: The pressure difference between the separator inlet and outlet exceeds 0.15MPa, resulting in reduced exhaust volume and increased energy consumption. Solution: Replace the filter in time to avoid filter damage or overload of the housing due to excessive pressure difference. Return oil failure Reason: Return oil valve blockage, throttling hole blockage, or leakage of the return oil pipe. Harm: The compressor operates without oil, causing wear of the main unit and sudden temperature rise. Solution: Disassemble and clean the return oil components to ensure smooth return oil.

Atlas Copco 0663716702,The sealing function is bidirectional. As a bidirectional sealing element, the initial compression amount during installation in the radial or axial direction determines the initial sealing capacity. The force generated by the system pressure acting on the O-ring is the total sealing force, and this sealing force increases as the system pressure rises. The leak-free sealing can achieve absolute leak-free sealing as long as the O-ring has an initial pressure. Buffering and shock absorption. By utilizing the elasticity of rubber to absorb mechanical vibrations or impacts, the rigidity collision between components is reduced. It buffers the vibration during engine operation and avoids interface loosening. System protection prevents dust, particles, water or corrosive substances from entering the equipment interior, protecting precision components. It plays a waterproof sealing role in electronic equipment and prevents rainwater or moisture from invading the circuit board.

Maintenance Key Points for Worm Wheel Type Impellers in Atlas Copco Centrifugal Air Compressors Regular Inspection: Use endoscopes or shut down for disassembly to check if there are cracks, wear, deposits, or foreign object impact marks on the impeller surface. Special attention should be paid to the blade roots (stress concentration areas). Dynamic Balance Calibration: If the impeller shows slight deformation or wear after long-term operation, it may cause dynamic balance imbalance. Re-calibration is necessary to avoid excessive vibration of the shaft system. Replacement Standard: When the impeller has irreparable cracks, severe damage to the blades, or the dynamic balance cannot be adjusted to the qualified range, it is necessary to replace the original factory impeller in time to ensure the matching and operational safety of the unit.

Atlas Copco 2906066000,The air compressor maintenance package protects the design of the air compressor, reduces equipment wear, maintains stability and extends lifespan: The maintenance includes air filters, oil filters, and oil-gas separators, etc. Regularly remove impurities to prevent blockages and ensure proper temperature operation. 2230000800,Original factory parts maintenance can avoid performance degradation and equipment damage of original factory parts, reduce the risk of thermal shutdown, and extend the overall lifespan. The entire maintenance package has a lower price and can be purchased in bulk. It optimizes inventory management and reduces costs caused by downtime.

Characteristics and Requirements of Air Compressor Gaskets Sealing: They should have good elasticity and adhesion, being able to tightly fill the minute depressions on the joint surface under pressure, ensuring no leakage. Temperature Resistance: They need to be able to withstand temperature changes during the operation of the air compressor (especially the higher temperatures of the cylinder body, exhaust pipelines, etc.), avoiding aging, hardening or losing elasticity under high temperatures. Pressure Resistance: They can withstand the rated pressure of the compressed air (usually 0.7-1.6 MPa) and instantaneous impact pressure, preventing being punctured by the pressure. Media Resistance: When in contact with the lubricating oil in the air compressor, the cooling liquid, or the trace impurities in the compressed air, they should have anti-corrosion and anti-swelling properties. Abrasion Resistance and Anti-Aging: During long-term use, they need to resist the effects of friction and environmental factors (such as humidity, oxidation), maintaining stable performance

The Atlas Copco CUBICLE FILTER cabinet-type filter achieves refined purification, which not only ensures the normal operation of downstream equipment but also reduces product quality issues caused by compressed air pollution. It is a key device for improving the quality of compressed air in the air compressor system.