China FILTER KIT FOR OIL INJECTED SCREW COMPRESSORS Manufacturer, Supplier, Factory

Atlas Copco 2230004015，Load solenoid valve: Usually a two-position three-way normally closed valve. When powered on, it allows compressed air to enter the cylinder pipe of the intake valve from the oil-gas tank, opening the intake port; when powered off, it cuts off the air path and discharges the air in the cylinder, closing the intake port. For example, the load solenoid valve of Ingersoll Rand achieves this function through PLC instructions. Safety relief solenoid valve: Mostly a two-position two-way normally open valve. When the air compressor is unloaded or shut down, it is powered off, releasing the gas in the oil-gas tank to the intake filter to ensure the system pressure drops to a safe range. In small air compressors, the solenoid valve connects the cylinder outlet to the outside when the machine is shut down to release residual pressure and prevent the motor from starting under load, causing overload; when starting, it closes the pressure relief channel to allow compressed air to be normally filled into the air tank. For example, the safety relief solenoid valve of Fuxinair air compressors indirectly regulates the movement of mechanical devices by controlling the opening and closing of the oil circuit.

Common Faults and Maintenance of 1635630500 Electromagnetic Valves in Atlas Copco Air Compressors Common faults of electromagnetic valves include coil burnout , valve core sticking , and aging of sealing components. During daily maintenance, the following points should be noted:Regularly check if the connection terminals are loose to avoid poor contact;Keep the valve body clean to prevent impurities from entering the valve core;When there is abnormal operation, it is recommended to replace the original electromagnetic valve to ensure performance compatibility. When replacing, pay attention to the consistency of voltage specifications and interface dimensions.

Atlas Copco 1616580381，The Atlas Copco air compressor head is the "heart" of the air compressor, responsible for compressing ambient air into high-pressure gas to provide power for various pneumatic equipment. The core function of the air compressor head is to efficiently compress air. It rotates at high speed within the casing with a pair of intermeshing rotors, continuously drawing in air and achieving air compression through the continuously decreasing volume between the rotor teeth. Eventually, it outputs gas that meets the pressure requirements. Compressing air is the most fundamental function of the head, providing a high-pressure gas source for subsequent use. Lubrication and sealing occur in the oil-injected screw compressor head. The lubricating oil is sprayed into the compression chamber, serving to lubricate the rotors, cool the compressed gas, and seal the tiny gaps between the rotors. Reducing noise and vibration The precise rotor design and balancing technology make the head run smoothly, with relatively low noise and vibration.

Atlas Copco 2906024100,When the high-pressure air compressor is running, the lubricating oil absorbs a large amount of heat generated during the compression process, causing the oil temperature to rise sharply. The ZT3 high-pressure oil cooler adopts a forced circulation cooling system, keeping the oil temperature within the range required by the equipment. This process effectively avoids problems such as reduced viscosity and weakened lubrication performance due to excessively high oil temperature. The ZT3 high-pressure oil cooler is specifically designed for high-pressure air compressors, and its cooling system can meet the circulation requirements of lubricating oil in high-pressure environments. At the same time, for the extreme working conditions that high-pressure air compressors may encounter, the ZT3 oil cooler is equipped with a complete electrical protection system to ensure the stability of the cooling process and prevent safety accidents caused by cooling system failures.

BY REPLACING THE OIL FILTER ON YOUR COMPRESSOR, YOU PREVENT AN ARRAY OF SHORT AND LONG TERM PROBLEMS, AS WELL AS SAVES YOU DOWN-TIME AND REPAIR COSTS LATER ON.THIS OIL FILTER MEETS OR EXCEEDS OEM SPECIFICATIONS.

The component design of Atlas Copco dryers emphasizes compatibility with air compressor systems. By optimizing heat exchange efficiency, adsorbent performance and automatic control logic, it achieves low energy consumption and high stability in the drying process of compressed air.