China Atlas Copco Transducer Pressure Sensor Manufacturer, Supplier, Factory

Maintenance Points Regularly replace the filter element: Based on the usage environment and operating time (generally recommended every 2,000-4,000 hours) , replace the filter element to avoid increased pressure loss and reduced filtering effect due to blockage. Pressure difference monitoring: Some models are equipped with a pressure difference indicator. When the filter element becomes clogged to a certain extent, it will give a prompt, and it is necessary to replace it in time to ensure the normal operation of the system. Sealing check: Regularly check the interface sealing condition of the filtering component to prevent unfiltered compressed air from leaking into the downstream system. If you need to purchase filter elements or want to know about specific compatible models, it is recommended to refer to the PD295 filtering component technical document provided by Atlas Copco officially, or provide the detailed model of the air compressor (such as GA37, GA55)

The Importance of Oil Filters for Atlas Copco GA18 Air Compressors If the oil filter becomes clogged or fails in its filtration function, it will lead to a decrease in the cleanliness of the lubricating oil, accelerate the wear of the main unit, increase the oil temperature, and even cause serious faults such as bearing sintering and rotor scratching. Therefore, it is recommended to use the original Atlas Copco oil filter to ensure the filtering effect and equipment compatibility. If you need to purchase, you can provide the specific production year or equipment serial number of GA18, and confirm the accurate oil filter model with an Atlas Copco authorized service provider to avoid affecting usage due to model differences.

Atlas Copco Air Compressors Oil Injected Screw Compressor Ball Valve 1/4 Selection Recommendation Applicable Models: The interface standards and working parameters need to be confirmed based on the specific model of the oil-injected screw compressor (such as Atlas Copco GA series small machines, Ingersoll Rand SSR series, etc.). Certification Requirements: Prioritize products that comply with industrial standards (such as ISO, DIN) to ensure compatibility with the system. Maintainability: Choose a disassemblable and repairable structure to facilitate the replacement of seals and extend the service life. If used to replace original factory parts, it is recommended to provide the compressor model and the original valve part number to ensure complete matching of size and pressure rating, avoiding any impact on system operation due to compatibility issues.

Atlas Copco EWD330 Electronic Drain Valve Maintenance Recommendations Compatible Models: This product is only applicable to Atlas Copco EWD330 electronic drain valves. Before purchase, confirm the production batch and electromagnetic valve specifications of the drain valve to avoid model mismatch. Maintenance Timing: When the drain valve shows slow operation, abnormal drainage (such as no drainage or continuous drainage), abnormal noise from the electromagnetic valve, or air leakage, it may be necessary to repair the electromagnetic valve. At this time, this kit can be used to replace the worn parts. Installation Notes: It is recommended to operate by professionals. Before maintenance, cut off the power and gas sources, assemble in accordance with the original factory manual specifications, ensure that the components are installed properly, and avoid functional failures or safety hazards due to improper assembly.

Atlas Copco Air Compressor Pressure Valve Cover Plate Daily Maintenance: Regularly inspect the cover plate for any looseness, deformation or cracks. If the bolts are loose, they must be tightened promptly. If there are cracks, the cover plate must be replaced. Check for any air leakage traces at the joint. If there is leakage, disassemble and inspect the seals to see if they are aged or damaged. In necessary cases, replace the seals and reinstall them. When maintaining the internal components of the pressure valve , be careful when removing the cover plate to avoid excessive force causing the cover plate to deform or the bolts to slip. Although the pressure valve cover plate is a structural component, its sealing performance and pressure-bearing capacity directly affect the control accuracy and system safety of the pressure valve. During installation, ensure reliable sealing.

Selection and precautions for the oil-water separator of Atlas Copco G series air compressors The oil-water separator should be selected based on the specific model (such as G37, G75) and displacement of the G series air compressor to ensure that the processing capacity matches. It is recommended to use the original Atlas Copco oil-water separator and filter element. Their materials (such as the filter element using high-efficiency fiberglass or polyester materials) and structural design are fully compatible with the G series models, which can ensure separation efficiency and service life, and avoid secondary pollution or excessive pressure loss caused by compatibility issues.