China Atlas Copco C242 Manufacturer, Supplier, Factory

Replacement Precautions Before installation, clean the oil stains and impurities on the interface surface to avoid scratching the sealing ring. Ensure a proper installation to avoid distortion or excessive stretching, which may affect the sealing effect. It is recommended to conduct regular checks and replace it in a timely manner according to the usage environment (such as humidity, temperature, and medium). Generally, it is advisable to replace it synchronously with the equipment maintenance cycle.

Never forget to order a spare part and avoid unplanned downtime. As your original equipment manufacturer, we know exactly which parts are needed for every service intervention. These are offered as a single maintenance kit with the quality assurance of genuine Atlas Copco parts.

Key points for replacement and installation: Accessory matching: It is necessary to use the original Atlas Copco connectors to ensure that the thread specifications (such as diameter, pitch, and length) are fully compatible with the MPV end caps of the corresponding model (the MPV specifications for different series of air compressors may vary). Sealing treatment: During installation, wrap sealing tape (such as PTFE tape) around the threads or apply sealant to ensure airtightness at the connection point and prevent leakage. Tightening specifications: Use the appropriate tools to tighten according to the specified torque to avoid over-tightening which may cause thread slippage or end cap deformation, and under-tightening which may lead to leakage. Interlock check: After replacement, check whether the relevant pipelines (such as the pressure sensor pipeline) are unobstructed to ensure that the pressure signal is normally transmitted to the control system.

1630040899 Atlas Copco operates every 1000-2000 hours or every 6 months. In harsh environments with a lot of dust, the replacement cycle should be shortened. The model is equipped with an air filter clogging indicator. When the indicator alarms, the filter element must be replaced immediately. 1630040899 Atlas Copco. Before installing 1630040899 Atlas Copco, clean the filter housing to ensure a seal and prevent impurities from entering.

Atlas Copco Purchase and Usage Recommendations Atlas Copco Model Matching: Select the corresponding kit based on the brand of the oil-free air compressor and the gearbox model (such as transmission power, reduction ratio). Avoid mismatched tool sizes or spare parts specifications. Atlas Copco Original Equipment Manufacturer Priority: It is recommended to choose the maintenance kit certified by the air compressor manufacturer to ensure that the material of spare parts (such as bearing accuracy grade, sealing performance resistance to aging) is consistent with the design standards of the gearbox. Atlas Copco Usage Specifications: Follow the maintenance manual provided with the kit, especially the torque parameters (such as the bolts of the gearbox cover usually require 25-35N·m) and the amount of lubricating grease (excessive may cause temperature rise).

The 8000-hour maintenance kit for the Atlas Copco IMD260 air compressor may vary slightly in specific component quantity and model depending on the supplier or original factory providing the maintenance kit. For accurate kit contents and detailed information, it is recommended to contact us directly, providing the specific model and serial number of the air compressor to obtain the most precise maintenance kit-related materials.