China Atlas Copco BALL BEARING Manufacturer, Supplier, Factory

Selection and Replacement Precautions Model Matching: The electromagnetic valves for different brands and models of oil injection screw compressors (including brands such as Atlas Copco) have different models. It is necessary to select the appropriate product based on the specific model of the compressor, working pressure, medium type (oil/gas), and other parameters. Quality Assurance: It is recommended to choose original factory or certified high-quality spare parts to ensure compatibility with the unit and long-term reliable operation. Installation and Maintenance: During replacement, power must be cut off and the machine must be shut down. Ensure the system is depressurized. After installation, check the sealing performance to avoid leakage; regularly clean impurities inside the valve to prevent jamming and functional impairment.

Purchase Recommendation for Pressure Sensors of Atlas Copco Compressors Pressure sensors have high requirements for measurement accuracy and stability. It is recommended to purchase original factory parts through our authorized channels. Inferior sensors may cause unstable equipment operation due to insufficient accuracy or poor reliability, and even pose safety hazards. Pressure sensors are the "nerve endings" of air compressor automation control. Their performance directly affects the operating efficiency and safety of the equipment, and should be given special attention during daily maintenance.

The Atlas Copco air compressor oil level indicator, although having a simple structure, is of vital importance for the safe operation of the equipment. During daily inspections, special attention should be paid to whether the oil level is normal and whether the oil quality has deteriorated. This ensures that the lubricating, cooling and sealing functions of the lubricating oil are fully exerted, thereby extending the service life of the air compressor.

Atlas Copco Maintenance and Replacement Recommendations Replacement Cycle: it is recommended to replace the filter according to the specified cycle in the unit maintenance manual . If the dust concentration in the usage environment is high, the replacement cycle should be shortened . Condition Judgment: Some models are equipped with an air filter pressure differential indicator. When the indicator value exceeds the set threshold, it indicates that the filter is clogged and needs to be replaced immediately; without an indicator, regularly disassemble and inspect the accumulated dust on the filter material surface. If it is obviously clogged or damaged, replace it immediately. Replacement Precautions: Before replacement, the unit must be shut down and the power disconnected to ensure safety. During installation, clean the impurities around the air inlet to avoid contaminants from falling into the air intake pipe during disassembly and assembly.

Replacement and selection suggestions for flat washers of Atlas Copco air compressors When replacing, it is necessary to strictly match the original specifications to avoid sealing failure or connection loosening due to size mismatch. For high-pressure, high-temperature or areas in contact with compressor oil, it is recommended to use original factory metal flat washers to ensure that the material is oil-resistant and pressure-resistant. If it is a critical sealing part (such as the end cover of the oil-gas separator), check whether the surface of the washer is flat, without scratches or deformation. If necessary, replace the new part to ensure the seal. For specific models or part numbers, you can refer to the parts manual of the air compressor (usually identified by a numerical code, such as 0650 series, 1622 series), or consult the Atlas Copco after-sales service for the equipment model to obtain precisely matched parts.

Atlas Copco Maintenance and Replacement: Regularly inspect the wear, deformation or aging of the special-shaped rings . Replace them immediately if any abnormalities are found. When replacing, it is necessary to use the original or the same specification special-shaped rings. Standard rings cannot be used as substitutes . During the disassembly and installation process, avoid hitting the weak parts of the special-shaped rings, to prevent deformation and damage. Although the special-shaped rings of the air compressor are not universal, they play an irreplaceable role in special structural parts. Their design and manufacturing need to strictly match the specific requirements of the equipment, and special attention should be paid to precision and directionality during installation and maintenance to ensure the coordinated operation of all complex components of the air compressor.