+86-15802015368
atlascopco128@163.com
English
Dongguan Taike Trading Co., Ltd.
Dongguan Taike Trading Co., Ltd.
Products

Products

China atlas copco air compressor solenoid valve Manufacturer, Supplier, Factory

To be able to ideal meet up with client's needs, all of our operations are strictly performed in line with our motto ""High High-quality, Competitive Cost, Fast Service"" for atlas copco air compressor solenoid valve, atlas copco solenoid valve, 1089062120, air compressor solenoid valve, 1089062120 air compressor solenoid valve, Our enterprise is dedicated to providing prospects with superior and stable top quality items at competitive selling price, producing each and every customer content with our services and products.
atlas copco air compressor solenoid valve, We've more than 200 staff including experienced managers, creative designers, sophisticated engineers and skilled workers. Through hard work of all employees for the past 20 years own company grew stronger and stronger. We always apply the "client first" principle. We also always fulfill all contracts to the point and therefore enjoy excellent reputation and trust among our customers. You are very welcome to personally visit our company.We hope to start a business partnership on the basis of mutual benefit and successful development . For more information remember to do no hesitate to contact us.

Related Products

Hot Products

  • Original Atlas Copco 1622550781 Thermostat 40c for oil injected screw comprssor

    Original Atlas Copco 1622550781 Thermostat 40c for oil injected screw comprssor

    Maintenance and Common Issues of 40°C Thermostat for Atlas Copco Air Compressors Regular Calibration: After long-term use, temperature drift may occur. It is recommended to calibrate with a thermometer annually to ensure accurate triggering at 40°C. Cleaning and Maintenance: If the sensing part is covered with oil or dust, it will affect the sensitivity of temperature measurement. It is necessary to wipe it regularly (operate in power-off state). Common Faults: Temperature Trigger Deviation: This may be due to the aging of the sensing element. Replacement of the same model thermostat is required. Contact Adhesion: Causes the cooling equipment to run continuously or fail to start. Check the contact condition and replace it if necessary.
  • Atlas Copco Genuine Screw Element

    Atlas Copco Genuine Screw Element

    When you are looking for genuine Atlas Copco Genuine Screw Element – no matter what SERVICE stage of screw element you are searching, here based on China, as one of the main and most reliable supplier for any Genuine Original Atlas Copco Spare parts, taikeAtlas Copco Airend – Screw Element Service Stages China Supplier
  • Atlas Copco Air compressor V-Belt Part 2914866700

    Atlas Copco Air compressor V-Belt Part 2914866700

    The V-shaped belt has the characteristics of simple structure, high transmission efficiency and convenient maintenance. It is suitable for equipment that requires stable power transmission, such as air compressors. In Atlas Copco air compressors, the specifications and models of the V-shaped belts vary according to the specific compressor model and power, in order to meet different transmission requirements.
  • 1830004330 Atlas Copco air compressor BUFFER GENUINE parts

    1830004330 Atlas Copco air compressor BUFFER GENUINE parts

    The Importance and Precautions of Buffer Components for Atlas Copco Air Compressors Failure of the buffer components may lead to: increased equipment vibration causing bolt loosening, pipeline fatigue fracture, excessive noise, and even affecting the lifespan of core components such as the main machine bearings and gears. When selecting, it is necessary to consider the model of the air compressor (for example, small piston machines focus on pipeline buffering, while large screw machines focus on overall shock absorption). Preferentially choose original factory parts that match the equipment to ensure compatibility in size and performance. In summary, although the buffer components of Atlas Copco air compressors are auxiliary components, they are crucial for the stability, safety, and lifespan of the equipment. Reasonable selection and regular maintenance can effectively reduce operational risks and decrease the occurrence rate of faults.
  • 2901052300 atlas copco OIL SEPARATOR KIT GA30-55C

    2901052300 atlas copco OIL SEPARATOR KIT GA30-55C

    Order will be placed on standard delivery conditions. After the order is placed, an order acknowledgement and tracking information will be provided to you by email.
  • 2901164101 Atlas Copco KIT FOR OIL INJECTED SCREW COMPRESSOR Original

    2901164101 Atlas Copco KIT FOR OIL INJECTED SCREW COMPRESSOR Original

    The original Atlas Copco air filter maintenance kit has been rigorously tested in terms of filtration efficiency, dust holding capacity, and structural strength, and is perfectly matched with the equipment design. It can maximize the filtration effect. Non-original filter elements may have issues such as insufficient filtration accuracy, excessive intake resistance, or poor sealing. Long-term use may lead to accelerated wear of the main unit, increased energy consumption, and ultimately increase the maintenance cost of the equipment.

  • 1622112000 Bushing for Atlas copco air Compressor Original Parts air Compressor Parts

    Replacement and Maintenance Suggestions: When the shaft sleeve shows excessive wear, scratches, cracks, or if the fit with the shaft exceeds the limit, it should be replaced immediately; otherwise, it may cause wear on the shaft neck, increased vibration, or abnormal noise from the equipment. When replacing, use original factory parts and ensure that the surface of the shaft and the bearing housing are cleaned before installation. If necessary, perform size checks according to the manual requirements. During installation, avoid knocking the shaft sleeve to cause deformation. If necessary, use professional techniques such as hot assembly to ensure the fit accuracy.

  • 1625599900 Atlas Copco

    For the Atlas Copco 1625599900 820 model hose, when installing it, make sure that the joints at both ends of the hose are securely connected to prevent leakage. During daily use, regularly check if the hose has any signs of aging, cracking, damage, bulging, etc. If any problems are found, replace it immediately to prevent system failures or safety hazards caused by the failure of the hose.

  • 2903775300 Atlas Copco SEPARATOR OIL SPARE PART FOR OIL INJECTED SCREW COMPRESSOR Original

    Atlas Copco SEPARATOR OIL SPARE Replacement cycle Normal operating conditions: According to the compressor manual, it is usually replaced every 2,000 to 4,000 hours (simultaneously with the lubricating oil). Severe operating conditions: When the environment is dusty, the machine operates at full load for a long time, or the oil deteriorates quickly, the replacement interval should be shortened to 1,000 to 2,000 hours. Pressure difference alarm: When the pressure difference between the oil filter inlet and outlet exceeds the set value (such as 0.3 MPa, some models come with pressure difference gauges or alarm functions), it is necessary to replace immediately.

  • 2901041300 Atlas Copco OIL INJECTED SCREW COMPRESSOR FILTER KIT OSD22-90 Original

    If you need to purchase or confirm the specific compatible model, it is recommended to provide the complete model number of the compressor (such as GA22, GA37, etc.), and refer to the corresponding number in the official Atlas Copco spare parts catalogue to ensure complete compatibility of the kit with the equipment. Regular replacement of the original filter kit is an important maintenance measure for maintaining the performance of the compressor and extending its service life.

  • 2901906800 atlas copco air compressor THERMOSTATIC VALVE KIT

    all products are sourced directly from authorized retailers in the Belgium, Germany, China. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

  • 2901990685 KIT DRAIN HDF120-AC

    The Atlas Copco DRAIN HDF120-AC drain valve adopts an electronic timed drainage system, providing reliable performance without the need for manual drainage. It has an IP65 protection rating for the housing, effectively preventing dust and moisture from entering, and is suitable for various industrial and outdoor applications. Its compact design saves space and is easy to install in existing compressed air configurations, with low maintenance requirements. Additionally, the DRAIN HDF120-AC reduces air loss during drainage and offers energy-saving benefits.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept