China 3001531152 Spare Parts Manufacturer, Supplier, Factory

Atlas Copco The oil filter and oil separator service kit for the air compressor is a comprehensive accessory set used for the maintenance and servicing of the compressor's oil and gas system. It is mainly used to replace the key filter elements regularly to ensure the cleanliness of the compressor's oil circuit and thorough oil-gas separation, thereby guaranteeing the efficient operation of the equipment and extending its service life.

Structural composition Valve body: The main body that connects the oil circuit, usually having an oil inlet, a direct outlet, and an outlet for the cooler. Thermosensitive element: The core component, which expands or contracts with temperature changes. Spring: Cooperates with the thermosensitive element to control the opening and closing degree of the valve. Valve core / Valve rod: The actuating mechanism, which regulates the oil flow direction according to the signal from the thermosensitive element.

If you need to purchase or replace the air compressor head of this model, it is recommended to do so through our Atlas Copco dealers to ensure the authenticity of the parts and the subsequent installation, after-sales support. At the same time, when replacing the air compressor head, professional technicians are usually required to operate to ensure the installation is in accordance with specifications and avoid affecting the normal operation of the air compressor.

Maintenance and replacement suggestions for the air cooler kits of Atlas Copco industrial compressors: Regularly clean the dust, oil stains, and other debris on the surface of the cooler core (this can be done by blowing with compressed air or rinsing with a dedicated cleaning agent) to prevent blockages that may affect the heat dissipation effect. If there are abnormal increases in the cooling temperature after the process, leakage in the pipeline, or fan failures, it is necessary to check the condition of each component of the kit. If necessary, replace the original factory air cooler kit. During the replacement process, it must be operated by professional technicians to ensure a good installation seal, the correct fan rotation direction, and testing the cooling effect after the replacement to avoid failure in heat dissipation due to improper installation.

Key points for replacement and installation: Accessory matching: It is necessary to use the original Atlas Copco connectors to ensure that the thread specifications (such as diameter, pitch, and length) are fully compatible with the MPV end caps of the corresponding model (the MPV specifications for different series of air compressors may vary). Sealing treatment: During installation, wrap sealing tape (such as PTFE tape) around the threads or apply sealant to ensure airtightness at the connection point and prevent leakage. Tightening specifications: Use the appropriate tools to tighten according to the specified torque to avoid over-tightening which may cause thread slippage or end cap deformation, and under-tightening which may lead to leakage. Interlock check: After replacement, check whether the relevant pipelines (such as the pressure sensor pipeline) are unobstructed to ensure that the pressure signal is normally transmitted to the control system.

1615494503 Atlas Copco function: It can reduce the vibration and noise during the operation of the air compressor, minimize the wear and malfunctions caused by vibration in the equipment, extend the service life of the equipment, and also improve the working environment and reduce noise pollution.