China 3001160210 Atlas Copco Manufacturer, Supplier, Factory

1621875099 Atlas Copco filter material: Usually, it uses ultra-fine glass fiber composite filter material from the US HV Company or pure wood pulp filter paper from the Korean Ahlstrom Company. These filter materials have excellent filtering performance and can effectively retain impurity particles of 10-15 microns. 1621875099 The filtration accuracy of Atlas Copco is generally 10-15 micrometers, with a filtration efficiency of approximately 99%. The working temperature range is usually between -10℃ and 100℃, and the working pressure can reach 1.6 MPa.

The original Atlas Copco air filter maintenance kit has been rigorously tested in terms of filtration efficiency, dust holding capacity, and structural strength, and is perfectly matched with the equipment design. It can maximize the filtration effect. Non-original filter elements may have issues such as insufficient filtration accuracy, excessive intake resistance, or poor sealing. Long-term use may lead to accelerated wear of the main unit, increased energy consumption, and ultimately increase the maintenance cost of the equipment.

Maintenance and replacement precautions for LDI drain valves of Atlas Copco air compressors Regularly check the working condition of the drain valve, observe whether the drainage is smooth, and avoid failure of drainage due to blockage by impurities (manual drainage can be performed periodically for auxiliary cleaning). If there is continuous leakage or inability to drain, the sealing parts or the entire valve body should be replaced in time to avoid affecting the quality of compressed air. When replacing, select the compatible model to ensure that the pressure grade, interface size, and equipment are matched; before installation, the system pressure should be emptied to prevent fluid ejection. Before long-term shutdown, it is recommended to manually discharge the residual water in the system to protect the drain valve and pipeline from corrosion.

Atlas Copco Air Compressors Oil Injected Screw Compressor Ball Valve 1/4 Selection Recommendation Applicable Models: The interface standards and working parameters need to be confirmed based on the specific model of the oil-injected screw compressor (such as Atlas Copco GA series small machines, Ingersoll Rand SSR series, etc.). Certification Requirements: Prioritize products that comply with industrial standards (such as ISO, DIN) to ensure compatibility with the system. Maintainability: Choose a disassemblable and repairable structure to facilitate the replacement of seals and extend the service life. If used to replace original factory parts, it is recommended to provide the compressor model and the original valve part number to ensure complete matching of size and pressure rating, avoiding any impact on system operation due to compatibility issues.

Common Issues and Maintenance of Atlas Copco Air Compressor Pressure Sensors Common issues with pressure sensors include measurement drift (inaccurate data), signal interruption (line or component failure), interface leakage, etc. Maintenance suggestions: Regularly check the sealing of the sensor installation to avoid pressure leakage or measurement errors due to looseness; Keep the sensor interface clean to prevent oil contamination and impurities from blocking and affecting the measurement; When there is abnormal pressure display, frequent start-stop of the unit, or incorrect pressure protection operation, it is necessary to check if the sensor is faulty. It is recommended to replace the original sensor to ensure performance matching. When replacing, pay attention to keeping the calibration parameters consistent with the original model.

Atlas Copco 2202207986 is made of high-strength cast iron and steel. It has sufficient rigidity and wear resistance, and is suitable for the long-term high-speed operation range of 500 - 3000 rpm of the machinery.