China 1635630500 Manufacturer, Supplier, Factory

Maintenance and Replacement Suggestions for Air Filters of Atlas Copco Screw Air Compressors Replacement Cycle: Generally, it is recommended to replace the air filter according to the specified cycle in the equipment maintenance manual (such as after 2000-4000 hours of operation, which may vary depending on the model and usage environment). If the dust concentration in the usage environment is high (such as in mines or cement plants), the replacement cycle should be shortened. Inspection Method: Regularly (e.g., weekly) check the cleanliness of the air filter. You can determine if it is clogged by using a pressure differential indicator (available on some models) — when the indicator value exceeds the set threshold, it is necessary to replace it promptly. Replacement Precautions: During replacement, ensure proper installation and good sealing; avoid allowing impurities to fall into the intake pipe during disassembly and assembly. After replacement, check for any leakage.

Atlas Copco air compressor PDP SENSOR -50C: Importance - Accurate measurement of pressure dew point is crucial for preventing moisture from condensing in compressed air. Moisture condensation can lead to pipe corrosion, equipment failure, and quality issues. This sensor can monitor in real time to enable timely measures to ensure the quality of compressed air.

Never forget to order a spare part and avoid unplanned downtime. As your original equipment manufacturer, we know exactly which parts are needed for every service intervention. These are offered as a single maintenance kit with the quality assurance of genuine Atlas Copco parts.

The oil filter models corresponding to different models of the XAS series air compressors vary. Common oil filter models include 1613610500, 97125402, 9709003400, 9710009801, 1613610500, etc. (The specific model needs to be determined according to the specific model of the air compressor.)

Atlas Copco Full Stainless Steel Gear Wheel Maintenance and Precautions Lubrication Guarantee: It should be used in conjunction with dedicated gear oil to ensure that the meshing surfaces of the gears are fully lubricated, reducing wear caused by dry friction; regularly check the oil level and condition of the lubricant and replace it according to the specified cycle. Regular Inspection: During operation, pay attention to observing whether there are abnormal noises, vibrations or temperature increases at the gear transmission parts. This may indicate gear wear, poor meshing or bearing problems, and it is necessary to stop the machine for inspection in time.

Replacement and Maintenance Precautions: If cracks, deformations, damage to the sealing parts, or worn-out connection threads occur on the shell, it must be replaced immediately. Otherwise, unfiltered air will directly enter the main unit, causing wear and tear on components such as rotors and bearings. During daily maintenance, it is necessary to check whether the seal between the shell and the filter element is intact, and clean the dust and impurities inside the shell (especially when replacing the filter element). When installing a new shell, ensure that the sealing ring is installed properly, and tighten the connecting bolts according to the specified torque to avoid air leakage or damage to the shell due to vibration.