China 1630040699 Manufacturer, Supplier, Factory

Although the seals of Atlas Copco are considered wear-prone parts, they are crucial for the efficient and safe operation of the air compressor. Proper selection, regular replacement, and standardized installation can effectively reduce leakage faults, lower energy consumption and maintenance costs.

Atlas Copco V-BELT (SET 2X) XPZ Maintenance Points: During installation, ensure the appropriate tension is maintained. Insufficient tension will cause the belt to slip, affecting the transmission efficiency. Excessive tension will increase the load on the bearings, shortening the lifespan of the belt and the bearings. During use, regularly check the wear condition of the belt. If cracks are found on the surface of the belt, severe wear, or slipping occurs, it is necessary to replace it promptly. At the same time, keep the belt clean to avoid the attachment of oil stains, dust and other impurities on the belt, which will affect its transmission performance.

Atlas Copco Air Compressor Oil Check Valve Maintenance and Replacement Check Period: It is recommended to conduct checks every 1-2 years or in accordance with the equipment manual (for example, after 4000-8000 hours of operation), and perform the checks simultaneously when replacing the filter and oil. Maintenance Points: Clean the valve core and valve seat to remove impurities; Check the wear of the seals and replace them promptly if they are aged; Test the elasticity of the springs. If the elasticity is insufficient, replace the entire valve. Replacement Precautions: Select original factory parts that match the model (such as Atlas Copco, Ingersoll Rand, etc. have dedicated oil check valves). Ensure that the size and pressure parameters are consistent; Pay attention to the direction during installation, and avoid installing it in the wrong direction; After replacement, start the equipment and check if the oil circuit pressure is normal and if there is any leakage.

Atlas Copco 2903775400=1625775400 Notes for Attention Choosing the original factory oil filter (such as the products corresponding to these two numbers) can ensure that the filtration efficiency, size accuracy and equipment are fully matched, avoiding the risk of host wear caused by the failure of inferior filter elements. If there is a replacement relationship between the numbers, when replacing, you can directly use the new number parts, and their performance and compatibility are the same as the old numbers.

The Atlas Copco GA90 of the GA series is one of the ideal choices for producing compressed air and reducing energy consumption. Atlas Copco 120 HP Oil Injected Air Compressors: follow China Taike Trading online distribution network to check out GA90P, GA90FF (air cooling & water cooling options are available).

You can rest assured to buy G2 G3 G4 G5 G7 Atlas Oil Injected Rotary Screw Compressors from our factory. Contact Taike Trading for “G2-7 models of Atlas Copco Oil Injected Rotary Screw Air Compressor” Now for the China dealer’s best Discounted price.