China 1622311026 Manufacturer, Supplier, Factory

2901156000 The original Atlas Copco assembly includes components such as oil filters, air filters, oil-gas separation filters, gaskets, and sealing rings.

The GVs R series is a robust and highly regarded range of vacuum pumps with a technologicallyadvanced design that is 'Made in India, The GVs R series are single stage, oil-sealed vacuumpumps that operate according to the proven oil-sealed rotary vane principle that has beensuccessfully used for many years in all general vacuum applications of the industry.

Maintenance suggestions for the linkage components of Atlas Copco air compressors Regularly check the tightness of the linkage components (such as coupling bolts, belt tension), to prevent eccentricity or slippage due to loosening. Observe for any abnormal vibrations, unusual noises or temperature increases, which may indicate wear or poor fit of the linkage components. Replace the wear-prone parts (such as coupling elastomers, belts) according to the maintenance schedule to ensure transmission efficiency and safety.

Key structural design Air intake: Gradually expanding or tangential design, reduces flow velocity and separates large particle impurities. Filter element installation: Vertical or horizontal installation, facilitating replacement and maintenance. Drainage structure: Gravity drainage port or automatic drainage valve, prevents condensate water from soaking the filter element. Sealing design: Uses nitrile rubber or fluorine rubber sealing rings, with compression ratio of 15% to 25%. Quick disassembly structure: Snap-fit or bolt connection, simplifies maintenance procedures.

Procurement and Adaptation When procuring, the model of the compressor (such as GA30, GX7), component serial number or installation location (such as the bottom of the oil-gas separator, the drain port of the gas storage tank) should be provided. Obtain the adapted components through the official authorized channels to avoid functional failure due to size or material mismatch. The stable operation of the spherical float valve is crucial for the medium separation efficiency of the air compressor and the safety of the system. Regular maintenance and timely replacement can effectively reduce equipment failures and problems with the quality of compressed air.

Atlas Copco Maintenance and Replacement Recommendations Replacement Cycle: it is recommended to replace the filter according to the specified cycle in the unit maintenance manual . If the dust concentration in the usage environment is high, the replacement cycle should be shortened . Condition Judgment: Some models are equipped with an air filter pressure differential indicator. When the indicator value exceeds the set threshold, it indicates that the filter is clogged and needs to be replaced immediately; without an indicator, regularly disassemble and inspect the accumulated dust on the filter material surface. If it is obviously clogged or damaged, replace it immediately. Replacement Precautions: Before replacement, the unit must be shut down and the power disconnected to ensure safety. During installation, clean the impurities around the air inlet to avoid contaminants from falling into the air intake pipe during disassembly and assembly.