Products

The combined effect of the air filter and the oil filter assembly in Atlas Copco air compressors The air filter purifies the incoming air, reducing impurities that enter the system and indirectly reducing the burden on the oil filter assembly; The oil filter assembly separates the oil from the compressed air, ensuring the quality of the outgoing air and simultaneously recovering the lubricating oil and reducing operating costs. The decline in the performance of either component will affect the efficiency of the air compressor: blockage of the air filter will result in insufficient air intake and increased energy consumption; failure of the oil filter assembly will cause the compressed air to contain excessive oil, polluting downstream equipment or products.

Characteristics and Requirements of Air Compressor Gaskets Sealing: They should have good elasticity and adhesion, being able to tightly fill the minute depressions on the joint surface under pressure, ensuring no leakage. Temperature Resistance: They need to be able to withstand temperature changes during the operation of the air compressor (especially the higher temperatures of the cylinder body, exhaust pipelines, etc.), avoiding aging, hardening or losing elasticity under high temperatures. Pressure Resistance: They can withstand the rated pressure of the compressed air (usually 0.7-1.6 MPa) and instantaneous impact pressure, preventing being punctured by the pressure. Media Resistance: When in contact with the lubricating oil in the air compressor, the cooling liquid, or the trace impurities in the compressed air, they should have anti-corrosion and anti-swelling properties. Abrasion Resistance and Anti-Aging: During long-term use, they need to resist the effects of friction and environmental factors (such as humidity, oxidation), maintaining stable performance

Selection and Notes on Compatibility Compatibility: Select matching accessories based on the model of the Atlas Copco air compressor, working pressure (typically 0.7-1.6 MPa), and hose type (rubber, PU, etc.). Ensure that the dimensions and specifications are consistent. Material Compatibility: For humid environments, choose stainless steel accessories; for ordinary industrial environments, you can use brass or galvanized steel accessories to avoid corrosion and affect the sealing performance. Regular Maintenance: Check the sealing of the joints, the flexibility of the valves, and the integrity of the protective covers. Replace any leaks or damages promptly to ensure system efficiency and safety.

Characteristics and Requirements of Air Compressor Hose Pressure Resistance: It must be able to withstand the rated pressure output by the air compressor (usually ranging from 0.7 to 1.6 MPa, and may be higher in special scenarios), with a certain safety margin to prevent burst due to excessive pressure. Aging and Weather Resistance: It needs to resist the effects of air, humidity, temperature changes, and ultraviolet rays, avoiding cracking, hardening or softening, and extending service life. Flexibility: It should have good bending performance, facilitating flexible arrangement in the working environment and reducing operational restrictions. Anti-wear and Anti-shock: In industrial environments, it may come into contact with the ground, equipment, etc., and needs to have certain wear resistance and anti-shock capabilities to prevent accidental damage. Smoothness of Inner Wall: The smooth inner wall can reduce the resistance of compressed air flow, lower pressure loss, and ensure supply efficiency.

The Atlas Copco 0502109055 air compressor ball bearing is a crucial component used in air compressors to support rotating parts (such as crankshafts, rotors, etc.). Its main function is to reduce mechanical friction, bear radial loads, and ensure the precise positioning and stable operation of the rotating parts. It directly affects the operating efficiency, noise level, and service life of the air compressor.

0347611900 Function: Ensure processing accuracy, increase production efficiency, reduce labor intensity, and expand the application scope of the machine tool, etc.