News

ATLAS COPCO WSD15 Its core features typically include: An air-driven design, suitable for working conditions that require high power output and have a demand for portability, especially in environments without power supply or where explosion prevention is necessary. 15 may represent parameters related to specifications, such as the diameter of the grinding wheel (e.g. 150mm), which should be referred to in the product manual. It usually has an ergonomic handle to reduce fatigue during long operations. It may be equipped with adjustable speed function or safety locking device to enhance operational safety and flexibility.

The Atlas Copco CUBICLE FILTER cabinet-type filter achieves refined purification, which not only ensures the normal operation of downstream equipment but also reduces product quality issues caused by compressed air pollution. It is a key device for improving the quality of compressed air in the air compressor system.

Atlas Copco AIR INLET WITH FILTER: Regular maintenance of the inlet with a filter can effectively reduce the failure rate of the air compressor, extend the equipment's lifespan, and ensure that the output compressed air meets the cleanliness requirements of subsequent pneumatic equipment, pneumatic tools, or processes (for example, the cleanliness requirements for compressed air in the food and pharmaceutical industries are higher, and a post-treatment filtration system may also be needed in some cases).

Failure causes and maintenance suggestions for Atlas Copco Air compressor O-ring Common failure causes: Long-term high-temperature aging leads to reduced elasticity, wear or scratches (such as impurities entering the sealing surface), improper installation (such as twisting, being too tight), incorrect selection (material not suitable for the medium or temperature). Maintenance precautions: Regularly inspect the condition of the O-ring. Replace it promptly if it shows signs of hardening, cracking, deformation or leakage. When replacing, clean the sealing groove and mating surface, remove oil stains, burrs and impurities. Avoid using sharp tools to scratch the O-ring during installation. If necessary, apply special lubricating grease (compatible with the medium) to assist in installation. Select matching specifications and materials for the O-ring based on the air compressor model and location.It is recommended to use original factory parts to ensure the sealing effect.

Advantages of Original Factory Bearings Precise Matching: Atlas Copco original factory bearings are precisely matched with the design parameters of the equipment (such as speed, load, and clearance), which can maximize the performance of the unit and prevent early failures caused by size or performance mismatch. Quality Control: Using high-quality bearing steel (such as GCr15SiMn), they undergo strict heat treatment and precise processing to ensure wear resistance, stability, and service life (typically designed for a service life of 20,000 - 40,000 hours). Certification Compliance: Compliant with international standards such as ISO and CE, and passing Atlas Copco's own rigorous tests (such as vibration and temperature cycling tests), meeting the requirements of industrial-level continuous operation.

Atlas Copco Air compressor Roller Bearing Main Types and Application Scenarios Spherical roller bearings Applicable to: Rotating components such as motor rotors and fan shafts that mainly bear radial loads. Features: Simple structure, low friction coefficient, capable of simultaneously bearing certain radial and axial loads, and allowing higher rotational speeds. Cylindrical roller bearings Applicable to: Parts that bear large radial loads, such as crankshafts. Features: Strong radial load-bearing capacity, large contact area between the rolling elements and the raceways, suitable for high-load conditions, but not suitable for bearing axial loads. Angular contact ball bearings