Company News

The air compressor oil filter is a key component of the lubrication system of an air compressor. It is mainly used to filter out impurities, particles and contaminants from the lubricating oil, ensuring that the oil entering the compressor meets the cleanliness standards, thereby protecting the internal components of the compressor (such as bearings, gears, rotors, etc.) from wear and damage, and extending the service life of the equipment. Working principle Physical interception: Through the microporous structure of the filter paper or filter element, particles larger than the pore diameter are mechanically filtered out. Adsorption effect: Some filter element materials can adsorb colloids and moisture, thereby enhancing the filtering effect.

The air compressor oil filter is a key component of the lubrication system of an air compressor. It is mainly used to filter impurities, particles and contaminants in the lubricating oil, ensuring that the lubricating oil entering the compressor meets the cleanliness standards, thereby protecting the internal components of the compressor (such as bearings, gears, rotors, etc.) from wear and damage, and extending the service life of the equipment. Core functions Impurity filtration Intercept solid particles such as metal debris, dust, and carbon deposits, preventing them from circulating into the working components of the compressor. System protection Reduce friction and wear, lower the risk of faults caused by contaminants, and improve the reliability of the compressor. Oil life extension Remove oxidation products and moisture, delay the aging and deterioration of the lubricating oil, and reduce the frequency of oil replacement.

1614727399 Large industrial screw machines may require replacement every 2,000 - 4,000 hours (in conjunction with oil quality testing); Miniature compressors (such as those for laboratories) may need to be replaced every 500 - 1,000 hours. It is essential to follow the manual and avoid equipment damage due to mismatched cycles.

What is the fundamental cause of the damage to the coupling? The fundamental cause of the damage to the coupling lies in the mismatch between the design, installation, maintenance and actual working conditions. By correctly selecting the type, conducting standardized installation, performing regular maintenance and optimizing the working conditions, the service life of the coupling can be extended from 1 to 2 years to 5 to 10 years, significantly reducing the risk of downtime and maintenance costs. It is recommended to establish a full life cycle management file for the coupling, recording the data from each maintenance, to achieve preventive maintenance.

New jet screw, oil-free screw, centrifugal compressor, ROTZ, screw, centrifugal blower; After treatment dryer, cooling dryer, filter; Pressure swing adsorption nitrogen machine; In addition, controller expansion has been optimized, and energy recovery equipment and over 20 new products will be provided simultaneously.