1. Core functions of Atlas Copco KIT VALVE VACUUM CONTROL:
Vacuum regulation: By changing the valve opening, precisely control the vacuum pressure within the system, keeping it within the set range (such as avoiding excessive vacuum that causes equipment overload, or low vacuum that affects efficiency).
Pressure protection: When the system vacuum exceeds the safety threshold, the device can automatically close or open the valve to prevent equipment damage due to abnormal pressure.
Air flow control: Adjust the gas flow entering or exiting the air compressor to match the equipment load requirements and reduce energy consumption.
2. Working principle of Atlas Copco KIT VALVE VACUUM CONTROL
The valve-type vacuum control device usually consists of a vacuum valve, sensors, and a controller:
Sensor monitoring: Real-time detection of the system's vacuum level (pressure value) and transmitting the signal to the controller.
Controller judgment: Comparing the detected value with the set value, if there is a deviation, an instruction is issued to regulate the vacuum valve.
Valve action: The vacuum valve changes its opening degree (fully open, fully closed, or partially open) according to the instruction, adjusting the gas flow rate until the system vacuum returns to the set range.
For example: When the system vacuum is too high, the valve opens to introduce external gas to balance the pressure; when the vacuum is too low, the valve closes to reduce gas leakage and maintain the vacuum environment.
3. Typical application scenarios of Atlas Copco KIT VALVE VACUUM CONTROL
Oil-free air compressors: In scenarios requiring a clean vacuum environment (such as in the medical and electronics industries), the control device can prevent oil from entering the vacuum system.
Vacuum suction system: Combined with the air compressor to provide a stable negative pressure for vacuum suction cups, ensuring reliable material grasping (such as in automated production lines).
Pressure cycling equipment: Maintaining stable vacuum levels in cyclic pressure changes, ensuring consistent equipment operation.
4. Maintenance precautions for Atlas Copco KIT VALVE VACUUM CONTROL
Regular cleaning: Avoiding dust and oil contamination blocking the valve or sensors, which may affect detection accuracy and operational flexibility.
Seal check: The connection between the valve and the pipeline needs to remain sealed to prevent air leakage and control of vacuum level from being out of control.
Parameter calibration: According to the equipment operation requirements, regularly verify the set values of the controller to ensure they match the actual working conditions.
