Atlas Copco air compressor spare parts 2914501800 Function:
Secondary protection: As a backup of the main air filter, when the main filter fails due to damage, blockage, or improper installation, the safety filter can temporarily block most pollutants and prevent them from entering the core components of the compressor (such as the rotor, cylinder, etc.), playing an emergency protection role.
High precision filtration: High efficiency filtering materials are usually used to intercept small particles that the main filter element fails to filter (usually with a filtration accuracy equivalent to or higher than that of the main filter element), ensuring the cleanliness of the air entering the compression system.
Applicable models:
It is mainly suitable for part of Atlas Copco screw air compressors (such as GA series, GHS series and other specific models), which shall be determined according to the specifications of the air filtration system of the equipment. The accessory number 2914501800 is the unique identifier of the original factory, which can be used to accurately match the corresponding model.
Maintenance suggestion:
It needs to be replaced synchronously with the main air filter (or according to the maintenance manual's prescribed cycle). Even if the main filter is not damaged, the safety filter may accumulate pollutants after long-term use, affecting the intake efficiency.
When replacing, it is necessary to check whether the installation chamber of the safety filter element is clean to avoid impurities residue affecting the filtration effect.
If obvious contamination is found in the safety filter element, it may indicate that the main filter element has failed, and the status of the main filter element needs to be checked and replaced at the same time.
