Atlas Air compressor Common accessores

Atlas Copco 1420070853,By using internal threads to mate with bolts or screws, a tight connection is achieved between mechanical components, ensuring the stability of the compressor's internal structure. To address the vibrations generated during the compressor's operation, anti-loosening technology (such as patented anti-loosening tabs and keyway structures) is employed to prevent the nuts from loosening, thereby avoiding potential safety hazards. Commonly, materials such as carbon steel and stainless steel are used, meeting the requirements of various working conditions; at the same time, they comply with international standards like the Chinese and American standards, ensuring compatibility and reliability. Through the patented anti-loosening system, maintenance costs due to vibrations are reduced, the equipment's service life is extended, and the overall operating efficiency of the air compressor is improved.

The significance of maintaining the Atlas Copco air compressor temperature control valve kit The precise operation of the temperature control valve can prevent the problem of low oil temperature leading to emulsification of the lubricating oil, poor fluidity (increasing energy consumption), as well as the problem of high oil temperature causing the weakening of the oil film strength and the generation of carbon deposits (accelerating the wear of the main unit). Choosing the original Atlas Copco kit can ensure the compatibility with the oil circuit system of the unit, guarantee the control temperature accuracy and long-term reliability, and is an important maintenance link for maintaining the efficient operation of the air compressor.

Attention for the oil separation filter of Atlas Copco screw air compressor Part compatibility: The original Atlas Copco oil separation core must be used. It features efficient fiberglass or multi-layer filter materials, offering higher separation efficiency and matching the oil and gas tank in size, thus avoiding poor separation effect, excessive pressure difference or equipment damage caused by non-original products. Avoid contamination: During installation, do not touch the internal filter material of the oil separation core to prevent impurities from entering and affecting the filtering effect. Related maintenance: When replacing the oil separation core, it is recommended to also replace the lubricating oil and oil filter to ensure the overall cleanliness of the lubrication system.

The maintenance significance of the check valve stem adjustment kit for Atlas Copco ZT55-90 series air compressors Precise valve stem adjustment can ensure that the intake valve fully opens when loaded and fully closes when unloaded, directly affecting the volumetric efficiency and energy consumption of the compressor. Regular inspections can help detect valve stem wear or jamming issues in advance, avoiding unit shutdown or overload damage to core components due to failure of the intake valve. When choosing, it is recommended to prioritize the use of Atlas Copco original kit to ensure that the component size, material, and model fully match the ZT55-90 series, guaranteeing the adjustment effect and equipment operation reliability.

Maintenance Key Points for Worm Wheel Type Impellers in Atlas Copco Centrifugal Air Compressors Regular Inspection: Use endoscopes or shut down for disassembly to check if there are cracks, wear, deposits, or foreign object impact marks on the impeller surface. Special attention should be paid to the blade roots (stress concentration areas). Dynamic Balance Calibration: If the impeller shows slight deformation or wear after long-term operation, it may cause dynamic balance imbalance. Re-calibration is necessary to avoid excessive vibration of the shaft system. Replacement Standard: When the impeller has irreparable cracks, severe damage to the blades, or the dynamic balance cannot be adjusted to the qualified range, it is necessary to replace the original factory impeller in time to ensure the matching and operational safety of the unit.

Maintenance and Replacement Suggestions for Atlas Copco Oil Coolers Regular Cleaning: For air-cooled coolers, clean the dust and oil stains on the fins regularly. For water-cooled ones, check if the water channels are blocked or clogged to ensure the cooling effect. Leak Check: During daily inspections, observe if there are oil stains on the surface and interface of the cooler. If leakage is detected, replace the sealing parts or the entire kit promptly. Replacement Timing: When the cooler shows severe corrosion, large-scale damage to the fins, or internal blockage causing abnormal oil temperature rise (above the specified upper limit of the unit), it is recommended to replace the entire kit. Preferentially use Atlas Copco original accessories to ensure compatibility with the unit and cooling performance. The reliable operation of this kit directly affects the energy consumption, stability, and service life of the oil-free air compressor, and is an important guarantee for maintaining the efficient operation of the unit.