China Temperature Sensor 1089057470 Manufacturer, Supplier, Factory

Maintenance and replacement suggestions for stainless steel gear in Atlas Copco screw air compressor: Regularly check the meshing condition, tooth surface wear, and axial clearance of the gears. If tooth surface peeling, cracks, excessive wear, or abnormal noise are found, they should be replaced in a timely manner to avoid more serious transmission system failures. During replacement, it is recommended to select the stainless steel gear made by Atlas Copco, so as to ensure the matching between the material, accuracy and the whole machine, and ensure the stability and efficiency of the transmission system after replacement. The installation process needs to be operated by professional technicians, strictly following the equipment manual specifications to ensure correct gear meshing and firm fixation, and to avoid early damage caused by improper installation.

Atlas Copco The air compressor temperature sensor is an important component used for real-time monitoring of the temperatures of key parts of the compressor unit (such as exhaust temperature, oil temperature, and motor temperature, etc.). Its core function is to detect temperature changes and provide data support for the control system, ensuring that the equipment operates within a safe temperature range. At the same time, when abnormal temperatures occur, it triggers protection mechanisms (such as shutdown and alarm) to prevent mechanical failures or safety risks caused by overheating.

Key structural design Air intake: Gradually expanding or tangential design, reduces flow velocity and separates large particle impurities. Filter element installation: Vertical or horizontal installation, facilitating replacement and maintenance. Drainage structure: Gravity drainage port or automatic drainage valve, prevents condensate water from soaking the filter element. Sealing design: Uses nitrile rubber or fluorine rubber sealing rings, with compression ratio of 15% to 25%. Quick disassembly structure: Snap-fit or bolt connection, simplifies maintenance procedures.

If you need to purchase Atlas Copco air compressor oil filter, please provide the specific model of the air compressor (such as GA18, G55) or the equipment serial number. Then, confirm the accurate model through the authorized service provider of Atlas Copco to avoid any issues due to incorrect model matching and ensure proper usage.

Maintenance cycle and failure manifestations of the transmission shaft seal kit for Atlas Copco air compressors: It is recommended to inspect once every 8,000 - 12,000 operating hours, or replace it immediately if there is oil leakage on the outside of the machine body. Failure symptoms: Oil leakage (oil type), abnormal loss of compressed air, abnormal noise from bearings (caused by impurities intrusion) If you need specific part information, please provide the complete model of the air compressor (such as GA22 VSD) and the production year, so that we can accurately query the specifications and replacement manual of the original Atlas Copco seal kit.

Faults and Replacement Suggestions: Common Faults and Handling: Contact Erosion: Manifested as poor contactor engagement, severe overheating, or failure of the main circuit. Replace the contactor to prevent the motor from operating without phases; Winding Burnout: Usually caused by abnormal voltage or winding aging, resulting in the contactor unable to engage. Check the winding voltage and replace the original part; Stuck and Strange Noise: Caused by dirty iron core or failed spring. May lead to contact adhesion. Replace immediately to prevent the equipment from losing control. When replacing, please note: Power off and confirm that the main circuit voltage has been disconnected. When connecting, distinguish between the main contact (high-power circuit) and the auxiliary contact (control circuit). Secure the connection terminals to prevent loosening and overheating.