China oil injected screw comprssor Thermostat 40c Manufacturer, Supplier, Factory

The compatible check valve kit can serve as an economical alternative to the original factory kit. However, in high-pressure, high-frequency operation or in situations with extremely high reliability requirements, it is still recommended to choose Atlas Copco's original factory parts as the preferred option.

The oil cooler of Atlas Copco air compressor GA132 functions as follows: The oil cooler is used to cool the lubricating oil during the operation of the air compressor, absorbing the heat from the compressed air that the lubricating oil has absorbed, and ensuring that the temperature of the lubricating oil remains within an appropriate range, thereby guaranteeing the normal operation and lubrication effect of the air compressor.

Maintenance notice for the oil filter housing of Atlas Copco air compressor 1117021 A52D: When replacing the filter element of the oil filter, it is necessary to check whether the sealing parts (such as O-rings) of this housing are in good condition. If there is aging or damage, they should be replaced in time to avoid oil leakage. During installation, it is necessary to tighten according to the specified torque to ensure the sealing performance.

Atlas Copco Gear Trial Run and Inspection Preliminary Inspection Manually rotate the gear shaft to feel if the rotation is smooth, and check for any sticking, abnormal noise or eccentric vibration. Check if the lubrication path in the gearbox is unobstructed, and add gear oil to the standard level as per the regulations. No-load Trial Run Connect the power supply and conduct a short-term (5-10 minutes) no-load operation. Listen for any abnormal noises (such as metal friction sounds, high-frequency squeals) from the gearbox. After stopping the machine, check the temperatures of the bearings and gears (should not exceed the ambient temperature by 40°C), and observe for any oil leakage. Load Test Gradually load to the rated pressure and run for more than 30 minutes. Recheck the noise, temperature and sealing conditions, and confirm there are no abnormalities.

Atlas Copco G11 is a classic medium and small-sized fixed oil-injected screw air compressor series under the Atlas Copco brand. It is designed for small and medium-sized industrial applications, with core advantages including high efficiency, reliability and compact design. It is widely applicable in scenarios such as workshops, manufacturing, auto repair, packaging and other places that require stable compressed air.

Maintenance points for the solenoid valves of Atlas Copco industrial compressors: Solenoid valves are prone to getting stuck or leaking due to impurities and oil contamination in the compressed air or aging of the seals. Regular inspections and cleanings are necessary. If the valve fails to operate properly, it is necessary to check if the power supply is normal and if the valve core is worn. In case of necessity, the original factory solenoid valves should be replaced to avoid control system failures.