China CONTROL UNIT Manufacturer, Supplier, Factory

BY REPLACING THE OIL FILTER ON YOUR COMPRESSOR, YOU PREVENT AN ARRAY OF SHORT AND LONG TERM PROBLEMS, AS WELL AS SAVES YOU DOWN-TIME AND REPAIR COSTS LATER ON.THIS OIL FILTER MEETS OR EXCEEDS OEM SPECIFICATIONS.

Where can I get the genuine original Part ATLAS COPCO 2901990038 KIT MAINTENANCE 8000 HRS? Here you are lucky to find a reliable China supplier. Contact taike for the latest price and availability as well as delivery time for any “real Genuine Orginal Epiroc Parts” Now.

Work mode Constant pressure control: Maintains the exhaust pressure within the range of the set value ±0.1bar, suitable for precision gas usage scenarios Load/unload mode: Unloads when the pressure reaches the upper limit and loads when it drops below the lower limit. Higher energy consumption Variable frequency control: Achieves stepless speed regulation by adjusting the motor frequency, with significant energy-saving effect (15-35% more energy-efficient than fixed-speed models) Multi-machine linkage: Multiple air compressors work together, automatically distributing the load according to the total gas usage demand

Characteristics and Requirements of Air Compressor Gaskets Sealing: They should have good elasticity and adhesion, being able to tightly fill the minute depressions on the joint surface under pressure, ensuring no leakage. Temperature Resistance: They need to be able to withstand temperature changes during the operation of the air compressor (especially the higher temperatures of the cylinder body, exhaust pipelines, etc.), avoiding aging, hardening or losing elasticity under high temperatures. Pressure Resistance: They can withstand the rated pressure of the compressed air (usually 0.7-1.6 MPa) and instantaneous impact pressure, preventing being punctured by the pressure. Media Resistance: When in contact with the lubricating oil in the air compressor, the cooling liquid, or the trace impurities in the compressed air, they should have anti-corrosion and anti-swelling properties. Abrasion Resistance and Anti-Aging: During long-term use, they need to resist the effects of friction and environmental factors (such as humidity, oxidation), maintaining stable performance

Working principle： Expansion and contraction driven: The constant temperature valve mainly operates based on the principle of thermal expansion and contraction. Special expansion temperature-sensitive paraffin wax and other components are usually used as the temperature sensing elements. When the oil temperature rises to the melting point of the paraffin wax, the wax expands significantly, generating a large force that pushes the push rod, causing the valve core to move and opening the valve; when the oil temperature drops, the paraffin wax contracts due to the cold, and under the spring rebound effect, the valve core resets, closing or reducing the valve opening. Oil passage control: The expansion and contraction of the valve core is used to adjust the changes in the oil passage between the valve body and the housing, thereby controlling the proportion of lubricating oil entering the oil cooler. When the oil temperature is lower than the set value, the valve closes or the opening degree decreases, and the lubricating oil directly returns from the oil-gas tank to the main unit, achieving rapid heating; when the oil temperature is higher than the set value, the valve opens, allowing the lubricating oil to enter the cooler for cooling, and the cooled lubricating oil returns to the main unit, thereby ensuring that the rotor temperature remains within the set range.

Atlas Copco Common Problems and Solutions Slip and Abnormal Noise: This is often caused by loose belts, oil contamination, or wear on the pulley grooves. Adjust the tension, clean, or replace the pulley. Excessive Breakage: This may be due to excessive tension, incorrect belt type, misaligned pulley grooves, or excessive load. Check and adjust as necessary. Severe Heating: This is usually caused by slipping or poor heat dissipation. Stop the machine immediately for inspection.